This Dynacord C2800FDI-US 2x1400W DSP Power Amplifier with FIR Drive is a DSP Power Amplifier 2x1400W.
Dynacord C2800FDI-US 2x1400W DSP Power Amplifier with FIR Drive Features:
- 4Installation DSP amplifier, Euroblock connectors
- Fully integrated professional speaker processing with FIR Drive technology
- Market leading acoustic performance and rock solid reliability
- Low Z and 70/100V operation and power saving standby mode
- Intuitive system control software, makes setup and control easy
Why not buy this Dynacord C2800FDI-US 2x1400W DSP Power Amplifier with FIR Drive from HDTV Supply today?
Dynacord C2800FDI-US 2x1400W DSP Power Amplifier with FIR Drive Specifications:
- Load Impedance: 2O 2.7O 4O 8O
- Maximum Output Power, SIngle Channel: 2O: 2300W;2.7O: 2000W; 4O: 1400W; 8O: 700W;
- Maximum Output Power, Dual Channel: Load Impedance:2O=2200W; 2.7O=1800W; 4O=1300W; 8O=650W; High Impedance: 70V Operation=2x1250W; 100V Operation=2x 2500W
- Maximum Output Power, Bridged Load Impedance:4O=4400W; 8O=2600W; High Impedance: Not recommended
- Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V
- Voltage Gain ref.1kHz:: 32.0dB
- IMD-SMPTE, 60 Hz, 7 kHz:
- DIM 30: < 0.05%% (3.15 kHz, 15 kHz)
- Maximum Input Level: +21dBu
- Crosstalk: < -80dB (ref. 1 kHz, at 100 W/4 O)
- Frequency Response: 10 Hz to 21 kHz (±1 dB)
- Input Impedance, active balanced: 20kO
- Signal-to-Noise Ratio (A-weighted): >107dB
- Output Noise , A-weighted: < -68dBu
- Output Stage Topology: Class H
- Power Requirement: 240 V, 230 V, 120 V or 100 V; 50Hz to 60 Hz (factory configured)
- Power Consumption: 700W (? Maximum Output Power @4O)
- Protection: Audio limiters, high temperature, DC, HF,Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
- Cooling: Front-to-rear, 3-stage-fans
- Safety Class: I
- Available Color: Black
- Height: 3.46" (88mm)
- Width: 19.02" (483mm)
- Depth: 18.2" (462.4mm)
- Weight Net: 35.71lbs (16.2kg)
- Signal Processing: FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance
- Mains Fuse: 240 V/230 V: T10AH; 120 V/100 V: T20AH
- Operating Temperature Range: +5°C to +40°C (40°F to+105°F)
- Remote Power ON/GPIO: Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
- Total Harmonic Distortion: < 0.05% (at 900 W/4 O MBW = 80 kHz, 1kHz)
Why not buy this Dynacord C2800FDI-US 2x1400W DSP Power Amplifier with FIR Drive from HDTV Supply today?
Dynacord C2800FDI-US User Manual
