This Dynacord C1300FDI-US DSP Power Amplifier with FIR Drive Phoenix Connectors has fully integrated professional speaker processing with FIR drive technology with a market leading acoustic performance and rock solid reliability. The C1300FDI has Low Z and 70/100V operation and power saving standby mode; the intuitive system control software, makes setup and control easy.
Dynacord C1300FDI-US DSP Power Amplifier with FIR Drive Phoenix Connectors Features:
- Installation DSP amplifier, Euroblock connectors
- Fully integrated professional speaker processing with FIR Drive technology
- Market leading acoustic performance and rock solid reliability
- Low Z and 70/100V operation and power saving standby mode
- Intuitive system control software, makes setup and control easy
Why not buy this Dynacord C1300FDI-US DSP Power Amplifier with FIR Drive Phoenix Connectors from HDTV Supply today?
Dynacord C1300FDI-US DSP Power Amplifier with FIR Drive Phoenix Connectors Specifications:
- Load Impedance: 2, 2.6, 4, 8 Ohm
- Maximum Output Power, Single Channel:
- 2Ohm= 1100W
- 2.6Ohm= 950W
- 4Ohm= 660W
- 8Ohm= 350W (Load Impedance)
- Maximum Output Power, Dual Channel:
- 2Ohm=1000W
- 2.6Ohm= 850W
- 4Ohm= 600W
- 8Ohm= 320W (Load Impedance)
- Maximum Output Power, Bridged:
- High Impedance= 2Ohm & 2.6Ohm=1x 600W
- Load Impedance= 4Ohm=2000W; 8Ohm=1200W
- Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3V
- Voltage Gain ref.1kHz: 32.0dB
- IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
- DIM 30: < 0.05% (3.15 kHz, 15 kHz)
- Maximum Input Level: +21 dBu
- Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ohm)
- Frequency Response: 10 Hz to 21 kHz (±1 dB)
- Input Impedance, active balanced: 20kOhm
- Signal-to-Noise Ratio (A-weighted): >104dB
- Output Noise , A-weighted: < -68dBu
- Output Stage Topology: Class AB
- Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
- Power Consumption: 550 W (? Maximum Output Power @4Ohm)
- Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
- Cooling: Front-to-rear, 3-stage-fans
- Safety Class: I
- Available Color: Black
- Dimensions (HxWxD): 3.46" x 19.02" x 18.2" (88 x 483 x 462.4mm)
- Weight Net: 28.44lbs (12.9kg)
- Signal Processing:
- FIR Filters, Audio Limiters
- Output delay per channel
- 31 band GEQ per channel
- PEQ per channel
- Load impedance
- High Impedance Operation: 70V (in bridged mode)
- Mains Fuse: 240 V/230 V= T10AH; 120 V/100 V= T20AH
- Operating Temperature Range: 40°F to +105°F (+5°C to +40°C)
- Total Harmonic Distortion: < 0.05% (at 450 with 4 Ohm MBW = 80 kHz, 1kHz)
Why not buy this Dynacord C1300FDI-US DSP Power Amplifier with FIR Drive Phoenix Connectors from HDTV Supply today?
Dynacord C1300FDI-US User Manual
