DVIGear DVI-2320-AOC 20 meters HyperLight AOC DVI Cable (65.6 ft)
is a new generation of advanced Active Optical Cables (AOC) that employs cutting edge technology to deliver unprecedented resolution, performance and value. HyperLight DVI cables provide robust features in a rugged yet compact and lightweight form factor. They are fully HDCP 1.4 compliant and support signals with data rates up to 4.95 Gbps. These features enable HyperLight cables to support any Single-Link DVI resolution with cable lengths up to 100 meters.
HyperLight cables are plenum-rated (UL CMP-OF), compact, lightweight and highly flexible. Constructed using a hybrid design of 4x POF (Polyfluorinated Optical Fiber) and 6x copper wires, they are rugged, yet flexible, with a minimum bend radius of just two millimeters. To minimize cable diameter, two removable DVI docking connectors may be detached, revealing a connector cross section that measures just 13.9 x 14.2 millimeters. The docking connectors include fixation screws for added security, as do the removable cable pull covers. These features make the cables easy to install even in narrow conduits, as well as in plenum spaces.
HyperLight cables are designed for use in mission critical applications where image quality and dependability are paramount. The video signals are transmitted over four optical fibers, which make them immune to interference from environmental noise. The optical transmission path provides a very low RFI / EMI profile, which allows the cables to be installed in sensitive applications with strict security requirements. The cables draw power from the connected DVI source, eliminating the need for an external power supply. HyperLight AOC cables are ideally suited for applications that require ultra-high resolution DVI signals to be extended over long cable runs with flawless image quality.
DVIGear DVI-2320-AOC 20 meters HyperLight AOC DVI Cable (65.6 ft) Features:
- Lightweight, compact, flexible, plenum-rated Active Optical Cables (AOC)
- Supports DVI 1.0 and HDCP 1.4
- Supports HDMI using optional adapter cables
- Supports data rates up to 1.65 Gbps / lane or
- 4.95 Gbps total
- Extends any DVI Single-Link resolution up to
- 328 ft. (100 meters)
- Detachable DVI docking connectors can be secured with fixation screws
- Removable cable pull covers facilitate secure cable pulls
- Powered by the DVI source, no AC power adapter needed
- Supports DDC communications for EDID and HDCP
- Low RFI / EMI profile for sensitive applications
Why not buy this DVIGear DVI-2320-AOC 20 meters HyperLight AOC DVI Cable (65.6 ft) today?
DVIGear DVI-2320-AOC 20 meters HyperLight AOC DVI Cable (65.6 ft)
- Performance
- Standards Compliance: DVI 1.0, HDCP 1.4, UL CMP-OF
- Maximum Pixel Clock Frequency: 165 MHz
- Maximum Video Bit Rate: 1.65 Gbps/TMDS Lane, 4.95 Gbps total (Single-Link DVI)
- Maximum Color Depth: Up to 24 bits/pixel
- Maximum Supported Resolutions: 1920x1200, 2048x1080
- Digital Audio Support: 1-8 channels, 16 or 24-bit Linear PCM, 32-192 kHz sampling rate
- Connections
- DVI Input / DVI Output: 1x 18+1 DVI-D Male Connector
- Power: No external power supply is required.
- DDC Support
- EDID Support: EDID communications are fully supported
- HDCP Support: HDCP 1.4
- Optical
- Optical Technology: 4x Discrete Optical Channels, 10 GHz, 850 nm
- Optical Transmitter: Tx Module: 4x 850 nm Multi-Mode VCSELs
- Optical Receiver: Rx Module: 4x GaAs PIN Photo Diodes
- Cable
- Fiber Cable Type: Hybrid cable with 4x POF (Polyfluorinated Optical Fiber) and 6x copper members
- Cable Jacket: Plenum-Rated, Black
- Standard Lengths (meters)(1): 10, 15, 20, 25, 30, 40, 50, 60, 75, 100
- Standard Lengths (feet)(1): 32.8, 49.2, 65.6, 82.0, 98.4, 131.2, 164.0, 196.9, 246.1, 328.1
- Maximum Cable Length: 328 ft. / 100 meters(1)
- Mechanical - Cable
- Product Weight: Varies with length
- Maximum Tensile Load: > 200N
- Minimum Bend Radius: 2 mm (fiber and jacket)
- Crush Resistance: > 500N
- Cable Connector (L x W x H): Male PCBA Edge Connector with Removable Cable Pull Cover, 1.8" x 0.5" x 0.4" (43.2 x 13.9 x 14.2 mm)
- Cable Outside Diameter (W x H): 0.2" x 0.1" (5.1 mm x 2.9 mm)
- Mechanical - Tx and Rx Docking Plugs
- Docking Connectors: PCBA Edge Connector to Male DVI Connector
- Construction: High-impact plastic enclosures with set screw for DVI Docking Connector
- Dimensions (L x W x H): 1.8" x 0.8" x 0.5" (54.8 mm x 39.7 mm x 16.2 mm)
- Environmental
- Operating Temperature: -4˚ to +158˚ F (-20˚ to +70˚ C)
- Storage Temperature: -4˚ to +185˚ F (-20˚ to +85˚ C)
- Operating / Storage Humidity: 5% to 85% (non-condensing)
- Power Requirements
- Power Source: Powered from DVI source device
- Power Consumption: < 0.3 watt maximum
- Regulatory Approvals Fiber Optic Cable: FCC, UL, CE, RoHS
- Warranty: 3 Years
- Accessories Included
- 1x Quick Start Guide
- 2x Removable Cable Pull Covers (DVI-2300-AOC-CVR)
