This DVDO PSE-1 HDBaseT Extender/Presentation is an advanced switching extender set featuring four inputs and UHD scaler.
The included transmitter offers two HDMI inputs and one VGA input with stereo audio, and the receiver offers an HDMI input, enabling an additional AV source to be connected at the display location.
The transmitter supports HDBT output up to 230ft/70m at 1080P and up to 131ft /40m at 4K@60Hz (YUV 4:2:0) over a CATX cable. The receiver supports the stereo audio de-embedding output from the HDMI output and connection with the audio system, such as an amplifier.
Built-in scaler with resolutions up to 4K@60Hz YUV 4:4:4 ensures the optimal image quality for video signal output, and matches the native resolution of the display.
This extender set allows automatic and manual button switch among all inputs. It features CEC controller to automatically turn on/off the display by auto-detecting signal input. It also supports RS232 control to power on/off the display such as projector, and relay control to turn on/off projection screen via API commands. Its one way PoH enables the transmitter to receive power from the power-on receiver; only one power supply is needed.
DVDO-PSE-1 simplifies system integration in classrooms and small offices, and facilitates installation under conference tables and in lecterns, providing localized presentation switching support over long distances.
DVDO PSE-1 HDBaseT Extender/Presentation Features:
- Two HDMI and one VGA inputs included on transmitter
- One HDMI input, one HDMI output along with one analog audio output included on receiver
- HDMI inputs support resolutions up to 4K@60Hz YUV 4:2:0 and HDCP 2.2; VGA input supports resolutions up to 1920 x 1200@60Hz
- Built-in 4K@60Hz YUV 4:4:4 scaler to match the native resolution of the display
- Supports automatic and manual button switch among all inputs
- Via a Cat 6a/7 cable, signal transmission up to 131ft/40m at 4K@60Hz (YUV 4:2:0) and 230ft/70m at 1080P
- Via a Cat 5e/6 cable, signal transmission up to 115ft/35m at 4K@60Hz (YUV 4:2:0) and 197ft/60m at 1080P
- HDMI audio de-embedded output with analog stereo
- Provides Telnet API control and configuration
- One-way PoH enables the transmitter to receive power from the power-on receiver (no additional power supply required at transmitter)
- Supports automatic CEC and API command to power on/off the display device
