This DVDO H264/5-Encoder IPAV HDMI Encoder with H.265/H.264 from DVDO is designed to be used with a separately available AV over IP decoder to input HDMI video at resolutions of up to 1920 x 1080p and output over IP. This encoder features an HDMI input port, an RJ45 LAN port for IP output and LAN management, and it can embed audio via the analog 3-pin terminal block input. It supports the high-efficiency H.265 and H.264 video codecs.
It supports IR and RS-232 control pass-through, independent RS-232 control, and a signal extension up to 328'. This encoder can be powered using the included single external power supply, or it can be powered using PoE (Power-over-Ethernet) from a separately available decoder. The unit can be configured and added to a wider video matrix using the VDirector app for iPad.
DVDO H264/5-Encoder IPAV HDMI Encoder with H.265/H.264 Features:
- Supports up to 1920 x 1080p Resolution
- HDMI Input & LAN Output/Management
- Up to 328' Signal Extension
- H.265/H.264 Codec Support
- Bidirectional Power-over-Ethernet
- 3-Pin Terminal Block Analog Audio Input
- 480Mb/s Data Stream Bandwidth
- Control via VDirector App for iPad
- Supports HDMI input resolutions up to 1080p60
- Extends 1080p signals up to 262' over a Cat 5e/6 cable and up to 328' over a Cat 6a/7 cable
- Analog audio port supports pass-through audio
- Bidirectional IR and RS-232 pass-through
- Provides RS-232 and LAN control options
- Bidirectional PoE (Power-over-Ethernet) capable where the power adapter connected to either side can power both transceivers
Why not buy this DVDO H264/5-Encoder IPAV HDMI Encoder with H.265/H.264 today?
DVDO H264/5-Encoder IPAV HDMI Encoder with H.265/H.264 Specifications:
- Video Input Connectors: 1 x HDMI (HDMI 2.0) Female
- Input Video Format:
- HDMI
- 1080p at 60 fps
- Audio Input Connectors: 1 x Block 3-Pin Stereo Analog Female
- Video Output Connectors:
- 1 x RJ45 Female
- 1 x HDMI (HDMI 2.0) Female (Loop Output)
- Output Video Format:
- HDMI / RJ45
- 1080p at 60 fps
- Audio Output Connectors: None
- HDR Compatibility: None
- Other I/O:
- 1 x RJ45 LAN Input/Output
- 1 x 3-Pin Euroblock IR, RS-232 Input/Output
- Expansion Slots: None
- Power Connector: 1 x Barrel (12 VDC at 1 A) Input
- PoE Support: PoE 802.3af
- Power Consumption: Device: 5 W
- Operating Temperature: 32 to 113°F / 0 to 45°C
- Storage Temperature: -4 to 158°F / -20 to 70°C
- Operating Humidity: 10 to 90%
- Storage Humidity: 10 to 90%
- Dimensions: 6.9 x 3.9 x 1" / 175 x 100.2 x 25 mm
- Weight: 1.3 lb / 600 g
Why not buy this DVDO H264/5-Encoder IPAV HDMI Encoder with H.265/H.264 today?
DVDO H264/5-Encoder User Manual