This Digital Projection E-Vision Laser 10K 1-Chip Laser-Phosphor Digital Projector/10500 ISO Lumens/10000x1 Contrast Ratio/WUXGA delivers an amazing 11,250 ISO lumens from a stable solid-state light source, capable of producing over 20,000 hours of illumination. In professional venues such as auditoriums and visitor Attractions that regularly contend with high levels of ambient light, the E-Vision Laser 10K brightness ensures the audience will experience the message with the saturated colors, bright imagery, and dark area detail that you or your client intended.
Equally compelling is the lack of lamp replacements due to the solid state illumination system. By bypassing regular lamp replacement cycles, almost all costs related to the E-Vision Laser are incurred at time of purchase. This key characteristic allows the E-Vision Laser 10K to have a much lower cost of ownership over the lifespan of the display. Combine the exceptional bright, long-life illumination source with a host of other precision features, and you have a projector solution that’s perfectly suited to a diverse range of professional venues.Digital Projection E-Vision Laser 10K 1-Chip Laser-Phosphor Digital Projector/10500 ISO Lumens/10000x1 Contrast Ratio/WUXGA Features:
- Video & Graphics Processing
- HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.
- Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources
- Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
- Synchronisation of active glasses.
- 3GSDI with loop-through.
- 24p and 1080p native display.
- DICOM simulation mode.
- Geometry Correction
- Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
- Blanking control for custom input window sizing.
- Scaling for fixed aspect ratio screens.
- Edge Blending
- For independent edge and blend width adjustment.
- Picture in Picture
- Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.4
- HDBaseT® Interface
- Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
- Allows the projector to be placed up to 100m from the source with low cost cabling.
- Colour Processing
- Powerful seven point colour correction for accurate colour matching.
- Projector Controller Software
- Intuitive user interface for network control
- Simultaneous control of user-defined groups of projectors
- At-a-glance monitoring of projector status
- Projector Automation
- Real-time clock provides daily on/off automation.
- Projector Maintenance Features
- Sealed optics.
- Long life 20,000 hour illumination.
Why not buy this Digital Projection E-Vision Laser 10K 1-Chip Laser-Phosphor Digital Projector/10500 ISO Lumens/10000x1 Contrast Ratio/WUXGA from HDTV Supply today?
Digital Projection E-Vision Laser 10K 1-Chip Laser-Phosphor Digital Projector/10500 ISO Lumens/10000x1 Contrast Ratio/WUXGA Specifications:
- Colour System: Laser Phosphor + 4-segment (RGBW) colour wheel for high brightness
- Display Type: 1 x 0.67" DarkChip™ DMD™
- DMD Specification: 1920 x 1200 pixels native display, Fast transit pixels for smooth greyscale and improved
contrast. - Aspect Ratio: 16x10
- Source Compatibility:
- 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
- HDMI including Deep Color™ processing.
- Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DisplayPort or VGA.
- Component Video (SD and HD) via RGBHV.
- Lens Mount:
- Motorised and programmable shift, zoom and focus.
- Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
- Mechanical Mounting:
- Front/Rear Table
- Front/Rear Ceiling
- Adjustable Front/Rear Feet
- Orientation Table:
- Top or Inverted: Yes
- Pointing Up: Yes
- Pointing Down: Yes
- Roll (Portrait): Yes
- Power Requirements: 100-240VAC 50/60Hz single phase
- Power Consumption:
- Typical 1215W @ 240VAC in Normal mode
- Typical 960W @ 240VAC in ECO mode
- Typical 1270W @ 110VAC in Normal mode
- Typical 1000W @ 110VAC in ECO mode
- Thermal Dissipation:
- Typical 4146 BTU/Hour @ 240VAC in Normal mode
- Typical 3276 BTU/Hour @ 240VAC in ECO mode
- Typical 4334 BTU/Hour @ 110VAC in Normal mode
- Typical 3412 BTU/Hour @ 110VAC in ECO mode
- Fan Noise:
- Normal mode: 42 dBA Typical
- Eco mode: 39 dBA Typical
- Operating/Storage Temperature Operating:
- Operating: 0 to 40C (32 to 104F)
- Operating: 40 to 45C (104 to 113F) w/ reduced light output
- Storage: -20 to 60C (-4 to 140F)
- Operating Humidity: 10 to 90% relative, non-condensing
- Weight: 28 kg / 62 lbs
- Dimensions:
- L: 59.83 cm x W: 50 cm x H: 21.85 cm
- L: 23.55 in x W: 19.68 in x H: 8.60 in
- Safety & EMC Regulations:
- CB, CE, FCC Class 1, KC, UL/cUL, CCC, RoHS 2
- IEC EN 60825-1 Class 3R Laser Product,
- IEC EN 62471-5 Risk Group 2
Why not buy this Digital Projection E-Vision Laser 10K 1-Chip Laser-Phosphor Digital Projector/10500 ISO Lumens/10000x1 Contrast Ratio/WUXGA from HDTV Supply today?
Digital Projection E-Vision Laser 10K User Manual
