This Digital Projection E-Vision 13000 WU 13500 ISO Lumens/12000 ANSI Lumens/10000x1 Dynamic Contrast Ratio/WUXGA Projector with Color Boost with Direct Red Laser Technology to create the most realistic and accurate colors ever produced by a high-brightness 1-Chip DLP Projector. With new intelligent processing, the color performance of the E-Vision 13000 WU is ever closer to that of a 3-Chip DLP projector.
Borrowing some of the advanced graphics processing from our flagship 3-Chip projectors, the E-Vision 13000 WU comes with HDMI 1.4b, Display Port, & HDBaseT connectivity and accepts commercial & domestic 3D signals. Additionally, projector automation, central control via a PC based application, Edge Blending, and Geometry Correction mean this amazingly powerful and compact single-chip DLP laser projector is positioned to be one the most popular projectors on the market.
The E-Vision 13000 WU has sealed optics and uses liquid cooling with radiators to remove energy to the outside environment. The optical system, from the laser light source up to the lens, is completely sealed and is considered IP60 rated. This ensures that light output and color performance will not be degraded due to the ingress of dust. Additionally, this projector is completely filterless as the system is liquid cooled and uses a radiator heat exchange to allow unrestricted airflow. This means there is virtually no maintenance necessary due to there being no need to replace or clean filters.
Digital Projection E-Vision 13000 WU 13500 ISO Lumens/12000 ANSI Lumens/10000x1 Dynamic Contrast Ratio/WUXGA Projector with Color Boost Features:
- Red Laser Assist
- Uses blue and red laser diodes for increased colour fidelity and highly accurate colurs
- Video & Graphics Processing
- HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.
- Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources
- Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
- Synchronisation of active glasses.
- 3GSDI with loop-through.
- 24p and 1080p native display.
- DICOM simulation mode.
- Geometry Correction
- Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
- Blanking control for custom input window sizing.
- Scaling for fixed aspect ratio screens.
- Edge Blending
- For independent edge and blend width adjustment.
- Picture in Picture
- Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.
- HDBaseT® Interface
- Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
- Allows the projector to be placed up to 100m from the source with low cost cabling.
- Colour Processing
- Powerful seven point colour correction for accurate colour matching.
- Projector Controller Software
- Intuitive user interface for network control
- Simultaneous control of user-defined groups of projectors
- At-a-glance monitoring of projector status
- Projector Automation
- Real-time clock provides daily on/off automation.
- Projector Maintenance Features
- Sealed optics.
- Long life 20,000 hour illumination.
Why not buy this Digital Projection E-Vision 13000 WU 13500 ISO Lumens/12000 ANSI Lumens/10000x1 Dynamic Contrast Ratio/WUXGA Projector with Color Boost from HDTV Supply today?
Digital Projection E-Vision 13000 WU 13500 ISO Lumens/12000 ANSI Lumens/10000x1 Dynamic Contrast Ratio/WUXGA Projector with Color Boost Specifications:
- Source Compatibility:
- 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
- HDMI including Deep Color™ processing.
- Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DisplayPort or VGA.
- Component Video (SD and HD) via RGBHV.
- Lens Mount
- Motorised and programmable shift, zoom and focus.
- Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
- Mechanical Mounting
- Front/Rear Table
- Front/Rear Ceiling
- Adjustable Front/Rear Feet
- Power Requirements
- 200-240VAC 50/60Hz single phase 7.8A 100-130VAC
- 50/60Hz single phase 11.5A
- Power Consumption
- Typical 1470W @ 240VAC in Normal mode
- Typical 1220W @ 240VAC in ECO mode
- Typical 1510W @ 240VAC in High Altitude mode
- Typical 1060W @ 110VAC in Normal mode
- Typical 1050W @ 110VAC in ECO mode
- Typical 1110W @ 110VAC in High Altitude mode W
- Thermal Dissipation
- Typical 5016 BTU/Hour @ 240VAC in Normal mode
- Typical 4163 BTU/Hour @ 240VAC in ECO mode
- Typical 5152 BTU/Hour @ 240VAC in High Altitude mode
- Typical 3617 BTU/Hour @ 110VAC in Normal mode
- Typical 3583 BTU/Hour @ 110VAC in ECO mode
- Typical 3787 BTU/Hour @ 110VAC in High Altitude mode
- BTU/Hour
- Fan Noise
- Normal mode: 48 dBA Max, 46 dBA Typical
- Eco mode: 44 dBA Max, 42 dBA Typical
- High Altitude Normal mode: 59 dBA Max, 57 dBA Typical
- High Altitude Eco Mode: 59 dBA Max, 57 dBA Typical
- Operating/Storage Temperature
- Operating: 0 to 35C (32 to 95F)
- Operating: 35 to 40C (95 to 104F) w/ reduced light output
- Storage: -20 to 60C (-4 to 140F)
- Operating Humidity: 10 to 90% relative, non-condensing
- Weight (Chassis Only)
- 31 kg
- 68.3 lb
- Dimensions
- L: 59.83 cm x W: 50 cm x H: 21.85 cm
- L: 23.55 in x W: 19.68 in x H: 8.60 in
