This Bolin Technology D412 Bolin Dante AV 4K60 12X PTZ Camera is the world's first Dante AV hardware enabled pan, tilt, zoom camera interfacing video and audio in a standard 1 Gbps network, and providing uncompromised video quality with lowest latency and synchronization.
The D Series Dante AV camera provides high quality color image up to 4K60 / Full HD, with quiet and smooth Pan, Tilt and Zoom capability.
It is a great video device that is fully compatible with Dante system for Dante audio devices to work with.
Bolin Technology D412 Bolin Dante AV 4K60 12X PTZ Camera Features:
- Multi-screen video display routing: Individually route video using familiar Dante Controller software, with no need for breakouts or matrix switches to display the camera video on any number of Dante AV-enabled screens.
- Video Output
- Deliver IP streaming video to Dante network and local HDMI 2.0 video output to conventional workflow in 4K60 or FHD.
- Multicast Mode
- Point to Multipoint and Point to Point Distribution - supports both unicast and multicast video distribution.
- Audio: HDMI embedded high-quality audio and DanteAV video streaming embedded audio with support for mic and line-in audio input.
- PTZ Movement: Extremely quiet and smooth operation for Pan/Tilt movements combined with enhanced adaptive, variable, and super slow speed control provides accurate and effective operation experiences. Picture Profile Preset- Image parameter setting restore with presets and quick access operation.
- Ease of Installation and Use: Simply connect one network cable from camera to any 1GB Ethernet network/POE device to access to existing Dante Audio-Over-IP system.
- Always Up to Date: Firmware updates, upgrade via USB and IP interface to keep DanteAV camera features and performance up to date.
Why not buy this Bolin Technology D412 Bolin Dante AV 4K60 12X PTZ Camera today?
Bolin Technology D412 Bolin Dante AV 4K60 12X PTZ Camera Specifications:
- Image Sensor: Sony IMX 307, 1/2.8" CMOS
- Pixels: 1920x1080, 2 MP
- Zoom: Optical Zoom 20X, Digital Zoom 2x
- Focal Length: 5.2~98mm, F1.5 ~ F3.0
- Aperture: F1.5(W)~F3.0(T)
- Horizontal Angle of View: 55.8°(W)~3.2°(T)
- Min. object distance: 1000mm(Wide), 1500mm(Tele)
- Min. Illumination: 0.5Lux (Day), 0.1Lux (Night)
- Shutter Speed: 1/1s~1/10000s
- Focus: Auto, Manual, One Push
- White Balance: AUTO, ATW, Indoor, Outdoor, USER, OPW
- Exposure: Full Auto, Manual, Shutter Priority, Iris Priority, Bright
- Image Adjustment: Brightness, Color(Saturation), Contrast, Sharpness, HUE
- Back Light Compensation: On/Off
- Flip: On/Off
- WDR: On/Off, Level 1-6
- Mirror: Horizontal
- Gamma: 5 Steps
- Noise Reduction: 2D/3D
- S/N Ratio: =50db
- OSD: Editable
- Video Format - HDMI 2.0: 3840x2160p:60/59.94/50/30/29.97/25/23.98,1920x1080p:60/59.94/50/30/29.97/25/23.98 1280x720p:60/59.94/50
- Color Format HDMI, RGB 8bit 4:4:4 / YUV 8bit 4:4:4 / YUV 12bit 4:2:2 / YUV 8bit 4:2:0
- Color Space: YUV(YCbCr), RGB
- Dante AV: Powered By DanteAV Module
- Network Interface: Standard 1Gbps Ethernet
- Video Codec: ProAV optimized implementation of JPEG2000 codec in FPGA, Licensed By IntoPIX
- Video Transport Format: Dante Video over IP
- DanteAV IP Video Format: 2160p:60/59.94/50/30/29.97/25/23.98,1080p:60/59.94/50/30/29.97/25/23.98; 720p:60/59.94/50/30/29.97/25/23.98
- Video Streaming: Unicast or Multicast
- Latency - Codec: Encoder to Decoder < 8ms with Low Latency Mode
- Bandwidth: 500-600Mbps at 4Kp60 10 bit 4:2:2; 150-250Mbps at 1080p60 10 bit 4:2:2
- Control Protocol: Visca serial control over IP(Visca RS422), Visca-Over-IP
- Video Output: HDMI 2.0X1, IP(Dante AV)
- IP Video Stream: Up to 4K/60 and 1080p60
- Camera Control Interface: RJ45X2-RS232/RS422, RJ45X1-IP Control, IR Remote Control
- Control Protocol: VISCA. Serial Over IP (Dante AV), VISCA Over IP, PELCO_D, PELCO_P
- LAN Port: RJ45X1(1000BASE-T Ethernet port)
- Synchronization: Internal synchronization
- Tally Light: Tally lamp in front, Red Color
- Dip Switch: Back Panel: 8 PIN x 1 for system setting; Video Resolution Dip X1 for video format setting
- Firmware Upgrade 1: Dante AV system upgrade via FUM; Back panel USB2.0 Type-A: Camera MCU firmware upgrade via USB
- IR ID: ID selector for IR controller, total 3
- Power Connector Type: IEC60130-10 (JEITA standard RC-5320A) TYPE4; RJ45: PoE++ (IEEE802.3bt)
- Audio Input: MIC/LINE input: 3.5 mm stereo mini jack, Input impedance: High impedance During MIC input, Supported mic: Stereo mic (plug-in power) Supply voltage: 2.5 V ± 0.5 V During LINE input Input level: Approx. -10 dBV ±3 dBV
- Audio Output: Embedded with HDMI, 24bit Stereo, Embedded with DanteAV IP signal. Sample rate: 44k1 to 192k, PCM24
- Operating Temperature: 32 to 104 (°F)
- Operating Humidity: =80% Suitable for Use
- Power Input: 12VDC, POE++, IEEE802.3bt Type 4 Class 6
- Power Consumption: Min: 33W; Max: 37W
- Heat Dissipation: 3 speeds
- Acoustic Noise: NC35 or less
- Mount: Ceiling mount, Wall mount, Tripod
- Size of Tripod Screw Thread: 1/4-20UNC x2, 3/8
- Dimension: 272 x 156.6 x 206.1mm
- Weight: 3.0kg
- Body Color: Metallic Gray
