This Bolin Technology D20S Dante AV Encoder/Decoder is part of Bolin DanteAV camera system. Over standard Gigabit network, a single-channel networked AV decoder outputs baseband video HDMI 2.0 and/or 12G-SDI, which not only works with Bolin DanteAV PTZ camera but also works with standard DanteAV video device within Dante eco system.
It transports up to UHD/4K60 4:4:4 video output with ultra low latency and lossless quality. It supports HDCP, plus IP PTZ camera control, embedded audio and control pass-through.
As part of Dante Audio over IP eco family, using standard Gigabit Ethernet network switches and CAT5e UTP wiring, D Series decoder delivers a high-performance virtual video matrix routing solution for presentation of multimedia, and live camera images, Dante 4k video content application such as demanding conference room and classroom applications.
Bolin Technology D20S Dante AV Encoder/Decoder Features:
- Can be configured to operate as an encoder or a decoder via firmware upgrade
- Ultra-low latency real-time video performance over IP network
- 4K60 4:4:4 video over standard Gigabit Ethernet
- Use as a decoder - provides HDMI 2.0 and/or 12G-SDI output
- Tunable audio delay to facilitate lip-sync control
- Supports unicast and multicast for 8 audio flow and 1 video flow
- Full support of Dante audio and video protocols
- Supported by Dante Controller
- Fully time-aligned and separately routable audio and video streams
- Visually perfect video using network efficient JPEG2000 codec
- Easy control of PTZ camera via Visca Over IP and serial/IR over IP
- Fully validated implementation of HDCP 2.2 (HDCP 2.3 network) encryption
- EDID support
- Works with installed 1Gbps network - no need to replace network infrastructure.
- Compact, surface/rack-mountable design
Why not buy this Bolin Technology D20S Dante AV Encoder/Decoder today?
Bolin Technology D20S Dante AV Encoder/Decoder Specifications:
- Codec:
- Device: Encoder/Decoder
- Video Codec: JPEG2000
- Video Resolution: Up to 4096x2160p60
- Bit Rates: 200 to 800 Mbps
- Copy Protection HDCP: Yes
- ULL-Ultra Low Latency: Yes
- Video:
- Format/Eco-System: Dante Video over IP
- Encoder Input: HDMI 2.0
- Encoder Monitor Output: HDMI 2.0
- Decoder Output: HDMI 2.0+12G-SDI
- HDMI Resolution: 4096x2160p, 3840x2160p, 1920x1080p, 1920x1200, 1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600, 720x576p, 720x480p, 640x480
- HDMI Frame Rate: 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- HDMI Color Space: RGB, YCbCr
- HDMI Bit Width: 8-bit, 10-bit, 12-bit
- HDMI Color Sampling: 4:4:4, 4:2:2, 4:2:0
- HDMI EDID: Yes
- SDI: 12G-SDI
- SDI Resolution: 4096x2160p, 3840x2160p, 1920x1080p, 1920x1200, 1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600, 720x576p, 720x480p, 640x480
- SDI Frame Rate: 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- SDI Color Space: YCbCr
- SDI Bit Width: 8-bit, 10-bit, 12-bit
- SDI Color Sampling: 4:2:2, 4:2:0
- Video Standard: SMPTE 292(1.5Gb/s), SMPTE 424, SMPTE 425-A(3Gb/s), SMPTE 2081, SMPTE 2082 With SMPTE352 SDI Metadata Supported
- Audio:
- Audio Format: Dante Audio over IP
- Encoder Input: Up to 8 channels to Dante
- Decoder Output: 2 channels from Dante
- Bit Depth: 24, 16 and 32 bits
- HDMI Audio Embedded: Yes
- SDI Audio Embedded: Yes
- Network:
- Ethernet: Standard 1Gbps Ethernet
- Ethernet Port: 2
- Video Flow: Yes
- Audio Flow: 15
- Control:
- Serial Control: RS422
- PTZ Camera Control: Yes
- Control Protocol: VISCA, VISCA Over IP
- USB: 2
- Mouse & Keyboard: Yes
- IR TX/RX: Yes
- PTZ IR Receiver: Yes
- General:
- Firmware Upgrade Via: IP
- Power Input: 12VDC, POE++(IEEE802.3bt, Type 3, class 6 compliant)
- Bolin POE Injector Recommended: Yes
- Mounting Orientation: Ceiling, Wall, Base, Rack(Single/Dual), Surface mount
- Operating Temperature: -10 to +40 (°C)
- Body Color: Black
