Bogen Communications WV100 Wall Mount Power Vector Modular Input Amplifier (100W)

Bogen Communications

Bogen Communications WV100 Wall Mount Power Vector Modular Input Amplifier (100W)
$805.92
Part Number:
WV100
Availability:
In stock
1:
2 Wall Mounting Options
2:
8 Module Bays
3:
4 Priority Levels
4:
Motorized Volume Control
5:
Free USA Shipping
6:
Authorized Bogen Direct Warranty
8:
Save 5% with check or wire transfer

This Bogen Communications WV100 Wall Mount Power Vector Modular Input Amplifier (100W) with 8 module bays for a wide array of inputs and outputs. Modules are available for signal processing and inputs such as: balanced and unbalanced inputs; stereo or mono; telephone systems/PBXs; transformer-isolated; microphones; tone generator; and bridging. The Power Vector automatically senses each module and inserts it into the signal path. A 5-position barrier strip allows for 4/8ohm or 25/70V output loads. Wall mounting is simplified with flush and surface options (sold separately) while a thermally controlled 3-speed fan will keep your amp operating at full power. When you need an amplifier with flexibility and reliability, the Wall Mount Power Vector WV100 is the obvious choice.

Bogen Communications WV100 Wall Mount Power Vector Modular Input Amplifier (100W) Features:

  • 8 module bays for inputs and outputs. Each input has an independent volume control
  • 4 levels of priority between modules
  • 125 Hz Lo-cut filter for module 6
  • 11-segment LED output level meter monitors the output level of the power amplifier with peak and average meter switch
  • Grounded, un-switched AC convenience receptacle with a 500W maximum capacity provided for external equipment
  • Remote volume control panel can operate motorized volume control (RVCP sold separately)

Why not buy this Bogen Communications WV100 Wall Mount Power Vector Modular Input Amplifier (100W) from HDTV Supply today?

Bogen Communications WV100 Wall Mount Power Vector Modular Input Amplifier (100W) Specifications:

  • Power Output: 100W
  • Distortion: <0.5%
  • Frequency Response:
    • Transformer: 45-20,000Hz
    • Direct output: 20-20,000Hz
  • Signal to Noise Ratio:
    • Fundamental: -94 dB
    • With Aux Module: -70 dB
    • With Mic Module: -60 dB
    • With Tel Module: -70 dB
  • Output Impedance:
    • Transformer-Coupled: 70V, 25V, 8 ohms (balanced or unbalanced)
    • Direct Coupled: 4 ohms
  • Output Connections:
    • Pre-EQ (RCA) x 1
    • Signal Processor (RCA) x 1
    • 2 module bays
    • Tape Out
  • Input Connections: 8 module bays
  • Specialties:
    • Thermistor attached to heat sink
    • Electronic overload protection(auto reset)
    • 3-speed cooling fan
  • Dimensions: 14.13 x 21" (358.78 x 533.4mm)
  • Weight: 27 lbs (12.24kg)
  • Packaging Info
    • Package Weight: 30.9 lb
    • Box Dimensions (LxWxH): 26.5 x 18.5 x 9.2"

    • Why not buy this Bogen Communications WV100 Wall Mount Power Vector Modular Input Amplifier (100W) from HDTV Supply today?