This Bogen Communications M600 M-Class 600W Power Amplifier is an amplifier that produces 600W stereo and 1200W mono output power. This powerful amp allows installation of up to 2 input modules. These modules can be used for a variety of professional installations and can accept inputs from microphones, telephone systems, stereo sources, mono sources, daisy-chained amplifiers for sound reinforcement applications, and more. A single standard input module with screw-terminal inputs is supplied.
The M600 relies on a massive power toroidal transformer. These amplifiers are built for solid performance with low distortion and a high slew rate. Output module circuitry is located away from input module circuitry, minimizing noise and ground loops. The amplifiers require little maintenance and cleaning, as internal electronic components are located outside of the forced air-stream flow. Front-mounted fan filters provide easy removal and cleaning.
The M-Class amplifier is enclosed in a 2 rack space, heavy-duty, 14-gauge chassis. Three modes of operation are available including 70V mono, dual mono, and stereo. This full featured amp is packaged in only 2 rack spaces and can be stacked with other components above or below without requiring extra ventilation space. The M600 M-Class Power Amplifier includes two grilles with filters, a control knob cover, four rubber feet with screws, two rack ears, and the aforementioned pre-installed balanced input module.
Bogen Communications M600 M-Class 600W Power Amplifier Features:
- 3 selectable low-frequency roll-off filter choices: Flat /65 Hz /125 Hz
- 2 x 1 mixer function when in mono modes
- Post- and Pre-EQ output feeds (in mono mode)
- Low noise, Low distortion
- Recessed volume control knobs
- Post- and pre-EQ output feeds (in Mono mode)
- Enable from 1-6 zones for music or paging
- DC, overload, and thermal protection circuits
- Back-slope AC voltage stabilization provides dependable performance even with varying AC line voltages
Why not buy this Bogen Communications M600 M-Class 600W Power Amplifier from HDTV Supply today?
Bogen Communications M600 M-Class 600W Power Amplifier Specifications:
- Amplifier
- Number of Channels: 1
- Amplifier Power Rating:
- 70 V: 1200 W Bridged
- 4 Ohms: 600 W per Channel
- 8 Ohms: 400 W per Channel
- Load Impedance / Voltage: 4 Ohms/70 V
- Performance
- Frequency Response: 20 Hz to 20 kHz ±0.25 dB
- Input Sensitivity: 1.161 V (at 4 Ohms)
- SNR: 109 dB (at 8 Ohms)
- THD: < 0.02%
- Signal Processing
- Filters: High-Pass
- Connectivity
- Analog Audio I/O:
- 2x Proprietary Input
- 1x Screw Terminal Balanced Input/li>
- Barrier Strip 5-Pin Output
- RCA Output
- Analog Audio I/O:
- Power
- AC Input Power: 95 to 130 VAC, 60 Hz
- Current Consumption: 20 A
- Physical
- Display & Indicators: LED (Clip/Limit/Signal/Status)
- Cooling: FM: Fan (Variable Speed)
- Dimensions: 17.0 x 3.5 x 18.5" / 43.2 x 8.9 x 47.0 cm
- Weight: 46 lb / 20.9 kg
- Packaging Info
- Package Weight: 54 lb
- Box Dimensions (LxWxH): 24 x 24 x 9.5"