This Bogen Communications C10 Classic Series 10W Public Address Amplifier is rated at 10W and can accommodate low-impedance microphones and high-impedance auxiliary sources. It features a front panel selector switch and a choice of either two low-impedance balanced microphones (Mic2, Mic2) or one microphone and one auxiliary input (Mic1, Aux).
This amp uses discreet complementary transistor circuitry for reliable power at each output stage. The rear panels are equipped with variable output taps at 4/8/16 Ohms and 25/70V. The amplifier is powered by 120 VAC. In addition, a thermostat enclosed in the power transformer protects the unit against overloads.
Bogen Communications C10 Classic Series 10W Public Address Amplifier Features:
- Voice activated muting of Aux input by Tel input
- Variable trigger threshold for voice activation
- Balanced and Unbalanced Outputs
- Transformer isolated output taps at 4/8/16 ohms and 25/70V
- Two low-impedance balanced microphones (Mic2, Mic2) or one microphone and one auxiliary input (Mic1, Aux).
Why not buy this Bogen Communications C10 Classic Series 10W Public Address Amplifier from HDTV Supply today?
Bogen Communications C10 Classic Series 10W Public Address Amplifier Specifications:
- Power Output: 10W
- Distortion: <1%@RPO
- Frequency Response: 70 Hz to 16 kHz
- Hum & Noise:
- Mic - 55 dB Below Rated Output
- Aux - 70 dB Below Rated Output
- Tel - 70 dB Below Rated Output
- Input Sensitivity:
- Mic - Lo-Z Balanced 600mV
- Aux - 85 mV (10 kOhms)
- Tel - 75 mV (600 Ohms)
- Output: 4/8/16 Ohms, 25/70 V
- Output Connections: Screw terminal strip
- Input Connections: Two Mic Lo-Z Terminals, Aux Hi-Z Jack, Tel Terminals
- Power Requirements: 120 VAC/60 Hz, 38 W
- Dimensions: 11.38 x 2.87 x 7.38" / 28.91 x 7.29 x 18.75 cm
- Weight: 5.0 lb / 2.3 kg
- Packaging Info
- Package Weight: 5.87 lb
- Box Dimensions (LxWxH): 13.85 x 10.3 x 5.4"