Bogen Communications BPA60 Power Amplifier 60W

Bogen Communications

$494.95
Part Number:
BPA60
Availability:
In stock
1:
60W Rated Output Power
2:
Distortion: Less Than 2% THD
3:
Transient Protection Diodes
4:
Resettable Circuit Breaker
5:
Free USA Shipping
6:
Authorized Bogen Direct Warranty
8:
Save 5% with check or wire transfer

This Bogen Communications BPA60 Power Amplifier 60W is a solid-state, 60W power amplifier that has been designed for professional and commercial sound systems. It can be driven from an amplifier that provides a 25- or 70-volt output and is thermally protected to prevent damage due to excessive temperatures.

Additional protection for the amp is provided by transient protection diodes and an electrical circuit breaker. The illuminated on/off power switch is located on the front panel. An input level control, circuit breaker reset, low-cut filter switch, and auxiliary receptacle are located on the rear panel.

Bogen Communications BPA60 Power Amplifier 60W Features:

  • 60W rated output power
  • Distortion: Less than 2% THD
  • Transient protection diodes
  • 20 Hz to 20 kHz frequency response
  • -10 dB at 100 Hz low-cut filter
  • Resettable circuit breaker
  • Selectable outputs modes of 8-ohm/25V, 16-ohms, 25V CT, and 70V
  • The BPA60 can operate at full output even with ambient temperatures up to 130°F

Why not buy this Bogen Communications BPA60 Power Amplifier 60W from HDTV Supply today?

Bogen Communications BPA60 Power Amplifier 60W Specifications:

  • Amplifier
    • Amplifier Power Rating: 60W
    • Load Impedance / Voltage:
      • 4 / 16 Ohms,
      • 25 VCT
      • 25/70 V
  • Performance
    • Protections: Circuit Breaker, Thermal
    • Frequency Response: 20 Hz to 20 kHz -2 dB
    • Input Sensitivity:
      • Hi-Z: 500 mV
    • Input Impedance:
      • Hi-Z: 50 Kilohms (Unbalanced)
      • Low-Z: 600 Ohms (Balanced/Unbalanced)
    • SNR: 85 dB
    • THD: < 2% (Full Range)
  • Signal Processing
    • Filters:
      • 1x High-Pass: 100 Hz
    • Limiting: Peak
  • Connectivity
    • Analog Audio I/O:
      • Barrier Strip Output
      • RCA Input
      • Barrier Strip Balanced Low-Z Input
  • Power
    • AC Input Power: 120 VAC, 60 Hz
    • Power Consumption: 180 W (Full Power)
  • Physical
    • Thermal Dissipation: 204.9 BTU/hr (Maximum)
    • Operating Temperature: -4 to 131°F / -20 to 55°C
    • Dimensions: 15.2 x 3.5 x 8.2" / 38.7 x 8.9 x 21.0 cm
    • Weight: 17 lb / 7.7 kg
  • Packaging Info
    • Package Weight: 17.4 lb
    • Box Dimensions (LxWxH): 18.4 x 11.4 x 7"

Why not buy this Bogen Communications BPA60 Power Amplifier 60W from HDTV Supply today?