This Blustream DA11ABL-WP-V2-US Bluetooth & Analog Audio Dante® Wall Plate is the DA11ABL-WP converts 2 x input channels of Bluetooth, or unbalanced audio to Dante® digital audio, and 2 x channels of Dante® audio to 2 x output channels of unbalanced audio.
Software configuration for the DA11ABL-WP allows for the Bluetooth name to be amended as required where being deployed in multi-user spaces.
The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for both UK & EU backbox compatibility.
The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.
Blustream DA11ABL-WP-V2-US Bluetooth & Analog Audio Dante® Wall Plate Features:
- Dante® network wall plate interface for Bluetooth and analog L/R audio inputs, and L/R audio outputs
- Converts 2ch Bluetooth, or un-balanced audio sources to Dante® audio
- Converts 2x Dante® audio channels to un-balanced audio outputs
- Configurable Bluetooth naming allows for simple discovery of the unit
- Adjustable input sensitivity from +24dBu to -28dBV via control software
- Adjustable output gain from +20dBu to -28 dBV via control software
- Supports: 44.1, 48 & 96kHz sample rates @ 16, 24 or 32 Bit
- Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
- Supports AES67 RTP audio transport
- Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch
- Supports power via 12V DC adapter (not included) for when network switch does not support PoE
- Magnetic faceplate surround and US Decora style backbox compatibility
Why not buy this Blustream DA11ABL-WP-V2-US Bluetooth & Analog Audio Dante® Wall Plate today?
Blustream DA11ABL-WP-V2-US Bluetooth & Analog Audio Dante® Wall Plate Specification
- Audio Input Connections: 1 x Analog Left / Right audio (3.5mm stereo jack)
- Audio Output Connections: 2x Analog RCA (Left / Right)
- Network Connection: 1 x PoE Dante® Ethernet Connection (RJ45)
- Bluetooth Connection: Bluetooth V5.0 - SBC / MP3 / AAC / APT-X / APTX-LL / APTX-HD, 44.1K-48KHz 16 / 24Bit
- Module Dimensions (W x H x D): 50mm x 104mm x 48mm (without faceplate)
- Faceplate Dimensions (W x H x D): 70mm x 155mm x 5mm
- Cut Out Dimensions (W x H x D): 46mm x 56mm x 39mm
- Mounting Hole Spacing: US 83mm CTC
- Backbox Requirements: US single gang junction box
- Shipping Weight: 0.5 Kg
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
- Power Supply: Class 0 IEEE 802.3af PoE or 12v/1A DC 2-Pin Phoenix connector