This Avenview HDM-C6MWIP-S-V3 H.264/1080p Sender/Encoder for Video Wall/Matrix is a HDMI 1.3 input and Cat 5e/6 LAN output and can be run point-to-point direct to a decoder or point-to-multi to a network switch up to 330′ away.
The encoder/sender unit supports up to 1080p60 on input and output, auto scaling and rotation, automatic format detection, live preview, HDCP 1.4, and the full system uses H.264/MPEG-4 AVC video compression. It can be powered using the included 12 VDC international power adapter or by using your existing PoE (Power-over-Ethernet) network. You can also de-embed analog audio from the encoder using the stereo terminal block output. To configure the unit, you can utilize telnet, a web GUI, or you can utilize serial controllers via an API using the RS-232 terminal block.
Avenview HDM-C6MWIP-S-V3 H.264/1080p Sender/Encoder for Video Wall/Matrix Features:
- Supports HDMI input and live IP video encoding at resolutions from 720 x 480p60 to 1920 x 1080p60
- Supports POE (Power-over-Ethernet) and Cat 5e/6 cable up to 330′
- Allows video previewing via iPad App and Windows 7/10 software at 352 x 288 at 5 Hz
- Supports HDMI 1.3 and DVI input
- Supports audio embedding over HDMI and analog audio de-embedding over stereo terminal block output
- Built-in auto-scaling and rotation
- Supports H.264, TCP/IP, Telnet, UDP, and IGMP 2.0
- Configurable encoding bit rate up to 30 Mb/s
- Support for Telnet, Web GUI control, and third-party control systems API commands via RS-232
- Supports Auto IP, zero-configuration networking
- Seamless switching, no black screen, no frame lock
- Automatic input format detection
- HDCP 1.4 compliant
- Supports video wall up to 16 x 16
- Reset button on unit
