This Avenview FO-HDSDI-L-SET HD/SD-SDI Extender over Fiber Optic with Loop-Out is a suitable solution for transmission of multi-rate SDI videos with embedded audio and metadata over a multimode fiber optic cable. The FO-HDSDI-L-S Transmitter Module receives 1 HD/SDI electrical input and converts the SMPTE 292M, SMPTE 259M, or DVB-ASI electrical SDI signals into multimode optic SDI signals. The FO-HDSDI-L-R Receiver Module receives optical signals from the input LC connector and then converts them into electrical SDI signals.
Both transmitter and receiver provide equalizing and re-clocking at the input unit in order to re-construct signals for consistent quality. The extender is suitable for today's broadcast applications, including video production, video editing, studio to studio, and studio to CATV head end. In addition, since transmission of content is inherently secure and immune to outside interference, fiber applications are favored in government, military, and medical environments.
Avenview FO-HDSDI-L-SET HD/SD-SDI Extender over Fiber Optic with Loop-Out Features:
- Enables transmission of digital video signals over fiber optic cable
- Automatic cable EQ up to 1,000' (300 m) at SD-SDI or 500' (150 m) for HD-SDI
- Standard LC-type fiber optic connector
- Supports the following protocols: SMPTE 259M (270 Mbps), SMPTE 259M (360 Mbps), SMPTE 292M / HDTV (1.485 Gbps and 1.485/1.001 Gbps), DVB ASI (270 Mbps)
- 1 SDI loop-out and 1 SDI BNC output
- HD/SDI input signal detection LED
Why not buy this Avenview FO-HDSDI-L-SET HD/SD-SDI Extender over Fiber Optic with Loop-Out today?
Avenview FO-HDSDI-L-SET HD/SD-SDI Extender over Fiber Optic with Loop-Out Specifications:
- SDI Standards
- SD-SDI & HD-SDI
- Detection Functions
- Auto: HD/SD-SDI: Yes
- Supported Protocols
- SMPTE 259 M (270 Mbps/360 Mpbs), DVB ASI (270 Mbps)
- SMPTE 292 M/HDTV (1.485 Gbps and 1.485/1.001 Gbps)
- Video Bandwidth
- 1.485 Gpbs & 1.485/1.001 Gbps
- Data Rates
- 270/1483/1485 Mbps
- Supported Video
- (HD) 720p 50/59.94/60, 1035i 50/59.94/60, 1080i 50/59.94/60, 1080p 24/30 (SD) NTSC @ 59.94 Hz, PAL @ 50 Hz
- SDI Signal Type
- SMPTE-292 M, SMPTE-259 M, DVB-ASI
- Output Impedance
- 75 W
- Re-clocking
- Mode:
- Automatic detection: 270 Mbps/1.483 Gbps/1.485 Gbps
- Automatic bypass: 177 Mbps/360 Mbps/540 Mbps
- Cable Equalization
- For FO-HDSDI-L-S Transmitter:
- (HD-SDI) up to 500' (150 m)
- (SD-SDI) up to 1,000' (300 m)
- For FO-HDSDI-L-R Receiver:
- (HD-SDI) up to 410' (125 m)
- (SD-SDI) up to 1,000' (300 m)
- Loop Outputs
- 1 re-clocking SDI loop-out
- Audio Support
- Yes
- RP-918 Pathological Patterns
- Immune
- Input Connectors
- For FO-HDSDI-L-S Transmitter:
- 1 x BNC (SDI)
- For FO-HDSDI-L-R Receiver:
- 1 x Optical LC (SDI)
- Output Connectors
- For FO-HDSDI-L-S Transmitter:
- 1 x Optical LC (SDI)
- 1 x BNC (SDI loop-out)
- For FO-HDSDI-L-R Receiver:
- 2 x BNC (SDI)
- BNC Connector
- 75 W inter-locked socket
- Fiber Connector
- Optical: LC Type
- Fiber Optic System
- Wavelength: 850 nm
- Extinction Ratio: 8 to 10
- Overshoot: <10%
- Optical Power: -4 to -10 dBm
- Type: Multimode
- Jitter: <0.2 UI
- Rise/Fall: <500 pS
- Receiver Sensitivity: -17 dBm
- Power Supply
- 5 VDC, 4 A
- Power Consumption
- 5 W (maximum)
- Operating Temperature
- 32 to 104˚F (0 to 40˚C)
- Storage Temperature
- -4 to 140˚F (-20 to 60˚C)
- Relative Humidity
- 20 to 90% RH (no condensation)
- Dimensions
- 4.3 x 1.6 x 1.2"(109.22 x 40.64 x 30.48 mm)
- Weight
- 5.46 oz (155 g)
- Packaging Info
- Package Weight
- 4.5 lb
- Box Dimensions (LxWxH)
- 5 x 5 x 3"
- Package Weight
