This AudioSource AMP1200VS 40W 12-Ch Multi-Room Power Analog Amplifier are designed for home and commercial audio distribution systems where high quality sound, flexibility, and reliability are essential. The AMP series offers exceptional value and many features that will make their installation and use easy and convenient.

12 Channel Amplifier: The AudioSource AMP1200VS employs a Class A/B amplifier design with 8 channels of amplification that can be used in a Stereo (4 to 8-ohm) or Bridged (8-ohm) configuration.

• Stereo (8-ohm): 40 watts x 12 channel, 20-20kHz, <0.2% THD+N
• Stereo (4-ohm): 40 watts x 12 channel, 20-20kHz, <0.2% THD+N
• Bridged Mono (8-ohm): 80 watts x 6 channel, 1kHz, <0.2% THD+N

2 Bus Inputs/Outputs: The AMP1200VS has two common or BUS inputs that receives audio signals from standard line-level audio sources and sends them to any or all channels. The BUS line outputs are direct feed-through to allow the BUS inputs to be fed to other amplifiers.

6 Zones: The 12 channel power amplifier is divided into 6 Zones. Each Zone can consist of either a pair of speakers in Stereo or a single Bridged mono speaker.

12 Independent Channel Inputs: All twelve channels of the amplifier have their own dedicated input that allows the connection of audio sources in addition to the common BUS inputs.

Channel Gain Control: Each channel has its own independent level adjustment on the back of the amplifier. This allows the output level of each speaker to be perfectly matched to its area. It can also be used to limit the maximum audio level in a certain area.

LED Status Indicator Lights: Each pair of channels or zones has a bi-color LED to indicate its operational status. A Blue light indicates normal operation, a Red light indicates that the amplifier's protection circuitry has been activated, and no light indicates the unit is in standby mode. These indicators provide quick and easy troubleshooting of the system.

Phoenix-Style Speaker Connectors: The AMP1200VS uses high quality Phoenix-style connectors for the speaker connections. Use 14-18 gauge stranded two-conductor loudspeaker wire.

Power On/Off Modes: The AudioSource AMP1200VS offers 3 Power On/Off Modes - Manual, Auto, and Trigger.

• Manual: In this mode, you can simply turn the AMP1200VS On or Off by pressing the Power button on the front of the amplifier.
• Auto: Set to Auto for signal sensing, which allows the amp to turn on when an audio signal (>5mV) is detected at one of its inputs. The front-panel power switch must be in the On position (pushed in) for the Auto feature to operate. When there is no audio signal present, the amplifier will return to Standby mode after 15 minutes.
• Trigger In/Out: The 12V trigger input and output allow the AMP1200VS to be powered on by other electronics or to power on other electronics via a 3.5mm minijack cable. The trigger input can operate with voltages between 3 and 30VDC.

Mounting Options: The AudioSource AMP1200VS power amplifier features four rubber feet and can simply be placed on top of a flat surface; like a table-top, shelf, or stand. You can also remove the four rubber feet and rack-mount the amplifier using the included rack-mount ears and screws.

AudioSource AMP1200VS 40W 12-Ch Multi-Room Power Analog Amplifier Features:

• 40 watts per channel into 4 or 8 ohms (20-20,000 Hz) at 0.2% THD with all channels driven
• 80 watts x 6 into 8 ohms bridged
• 12-channel amplifier with 6 independent playback zones
• Play the same source through all 6 zones, or play a different source in each zone
• High-efficiency switching amplifier design
• Extensive internal circuitry protects against overheating
• Detachable speaker connectors
• Rear-mounted independent gain controls for each channel
• Bus 1 and Bus 2 RCA inputs can be assigned to any channel so that different sources are available for each zone
  • each pair of bus inputs has a corresponding RCA output that can be daisy-chained to another amplifier
• Discrete pair of RCA inputs for each zone
• Flexible power modes include on/off, signal-sensing, and 12-volt trigger
• Rack-mountable with included hardware

Why not buy this AudioSource AMP1200VS 40W 12-Ch Multi-Room Power Analog Amplifier from HDTV Supply today?