This Aten VS1814T 4-Port HDMI HDBaseT Splitter (HDBaseT Class A) provid es a fast and efficient way of switching high definition vid eo from one input source to 4 displays. Incorporating suggested HDBaseT receivers*, the VS1814T can be a complete solution id eal for any installation that requires HDMI content to be delivered to multiple destinations, located up to 100m away from the source.
The solution implements HDBaseT extension technology to connect the VS1814T to receiver units over one single Cat 6/6a cable in order to transmit rich HDMI multimedia content in real time. It supports up to 4k2k resolution, and features an EDid selection method to ensure constant and reliable EDid data relay for the HDMI source device to efficiently optimize vid eo resolution.
ATEN VS1814T 4-Port HDMI HDBaseT Splitter (HDBaseT Class A) Features:
- One HDMI input to 4 HDMI outputs via a Cat 6/6a cable
- Offers local HDMI output
- Extends displays up to 100 m
- Implements HDBaseT extension technology using only one Cat 5 cable to connect the transmitter and receiver
- Anti-jamming - resists signal interference during high-quality vid eo transmissions using HDBaseT technology
- HDMI (3D, Deep color, 4kx2k); HDCP 1.4 Compatible
- Supports Dolby True HD and DTS HD Master Audio
- Consumer Electronics Control (CEC) support
- Built-in bi-directional RS-232 serial remote port for high-end system control
- Supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD
- Supports up to 340MHz bandwid th for high performance vid eo
- EDid mode selection
- Rack-mountable
NOTE: Many Aten products, bought here at HDTV Supply, comply with the USA Governments TAA requirements. TAA requires that products originate from the United States or another approved country. These Aten products, bought here at HDTV Supply, do not ship from China. Call us at 833-965-3722 for latest list of Aten TAA Complaint Products.
Why not buy this ATEN VS1814T 4-Port HDMI HDBaseT Splitter (HDBaseT Class A) today?
ATEN VS1814T 4-Port HDMI HDBaseT Splitter (HDBaseT Class A) Specification:
| Vid eo Input | |
| Interfaces | 1 x HDMI Type A Female (Black) |
| Impedance | 100 Ώ |
| Max. Distance | 1.8 m |
| Vid eo Output | |
| Interfaces | 1 x HDMI Type A Female (Black) - Local Output 4 x RJ-45 Female |
| Impedance | 100 Ώ |
| Vid eo | |
| Max. Data Rate | 10.2 Gbps (3.4 Gbps Per Lane) |
| Max. Pixel Clock | 340 MHz |
| Compliance | HDMI (3D, Deep Color, 4K) HDCP Compatible Consumer Electronics Control (CEC) HDBaseT Compatible |
| Max. Resolution | Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4) (Depends on connected receiver) |
| Max. Distance | Up to 100 m (Depends on connected receiver) |
| Audio | |
| Input | 1 x HDMI Type A Female (Black) |
| Output | 1 x HDMI Type A Female (Black) |
| Control | |
| RS-232 | Connector: 1 x DB-9 Female (Black) Serial Control Pin Configurations: Pin2 = Tx, Pin 3=Rx, Pin 5= Gnd Baud Rate and Protocol: Baud Rate: 19200, Data Bits: 8, Stop Bits:1, Parity: No, Flow Control: No |
| EDid Settings | EDid Mode: Default / Port 1 / Auto / Learn |
| Connectors | |
| Power | 1 x 3-Prong AC Socket (Black) |
| Power Consumption | AC110V:31.7W:149BTU AC220V:31.7W:149BTU |
| Environmental | |
| Operating Temperature | 0-50°C |
| Storage Temperature | -20 - 60°C |
| Humid ity | 0 - 80% RH, Non-Condensing |
| Physical Properties | |
| Housing | Metal |
| Weight | 3.47 kg ( 7.64 lb ) |
| Dimensions (L x W x H) | 43.72 x 26.11 x 4.40 cm (17.21 x 10.28 x 1.73 in.) |
| Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
