The ATEN Control System is an Ethernet-based management system that connects all the hardware devices found in a room for centralized control effortlessly. The VK0100 Control Pad not only plays the role as the main controller that connects the hardware devices, but also acts as a control interface with customizable buttons and layout. Created with flexibility in mind, the one-gang Control Pad can be laid out in 14 different combinations of 4 to 8 buttons that snap together as easy as Lego's. By connecting to the local network, users will find it's effortless using VK6000 software to configure the desired control of any connected device from the Control Pad. With the ready-to-go combo Control Pad, you have instant and smart control of the facilities from a Control Pad that can manage any device in the room.
ATEN VK0100 8-button Control Pad Features:
- Supports various interface connections:
- 2 x RS-232 ports
- 2 x Relay channels
- 1 x Digital input channel
- 1 x Ethernet port
- Fully customizable with 14 layout combinations of 4 to 8 buttons
- Supports native KNX IP for building management systems
- Telnet, TCP, UDP, HTTP, HTTPS, ONVIF, and PJLink compliant
- Supports project file backup1
- Web GUI for easy system configuration
- Supports SSH communication for data monitoring2
- LED indication of connection and hardware status
- Dual-color LEDs for clear indication in dark environments
- Redundant power supplies - Power over Ethernet and DC 5V (optional)
- Customized button engraving service
NOTE: Many Aten products, bought here at HDTV Supply, comply with the USA Governments TAA requirements. TAA requires that products originate from the United States or another approved country. These Aten products, bought here at HDTV Supply, do not ship from China. Call us at 833-965-3722 for latest list of Aten TAA Complaint Products.
Why not buy this ATEN VK0100 8-button Control Pad today?
ATEN VK0100 8-button Control Pad Specifications:
| Interfaces | |
| Keypad Layout | 4~8 buttons customizable in 14 keypad layouts |
| Serial | 2 x Bi-directional RS-232 Port (2 x 3-Pole Terminal Block Connector); - Baud Rate: 300 to 115200 (default: 9600); - Data Bit: 8 (default) or 7; - Stop Bit: 1 (default) or 2; - Parity: None (default), even or odd |
| Relay | 2 x Relay Channel (2 x 2-Pole Terminal Block Connector); Normally open, isolated Relays; Contact Rating: Max 24 VDC, 1A |
| I/O | 1 x Digital Input Channel (1 x 2-Pole Terminal Block Connector); - VDC Mode Input Voltage Range: 0 to 5 VDC; Programmable Range: 1 to 5 VDC; - Dry Contact Mode Pull-up 2k ohms to + 5 VDC |
| Ethernet | 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 |
| Switches | |
| Controller id | 1 x 16-segment Switch |
| Reset Button | 1 x Semi-recessed Pushbutton |
| Power Consumption | DC5V:1.1W:5BTU DC48V:1.375W:6BTU |
| Environmental | |
| Operating Temperature | 0 - 50˚C |
| Storage Temperature | -20 - 60˚C |
| Humid ity | 0 - 80% RH, Non-Condensing |
| Physical Properties | |
| Housing | Plastic |
| Weight | 0.14 kg ( 0.31 lb ) |
| Dimensions (L x W x H) | 11.63 x 7.06 x 4.84 cm (4.58 x 2.78 x 1.91 in.) |
| Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
