This Adder ALIF101T-DVI ADDERLink INFINITY High Performance ZeroU IP KVM A/V Extender Transmitter - DVI/USB2.0 is a high performance ZeroU聶 IP KVM (Keyboard, Video, Mouse) extender with matrix capability that enables the use of standard IT infrastructure to extend computers away from the user environment.
Adder ALIF101T-DVI ADDERLink INFINITY High Performance ZeroU IP KVM A/V Extender Transmitter - DVI/USB2.0 Features:
ZeroU™ size: The ADDERLink™ INFINITY 101T (ALIF101T) takes ZeroU™ of rack space in the server room allowing for ultimate flexibility and ease of installation.
IP-based: Use your existing networking infrastructure to extend or matrix your computing resources to your users.
USB powered: The device can be powered from USB. This means there is no need to provision for an external PSU. Options for powering from an external PSU or redundant PSU are also available.
Low power consumption: Requires less than 3 watts.
Video options: The system supports resolutions up to 1920 x 1200 @60Hz through a DVI interface
USB2.0: Enables you to connect any USB HID (human interface device) from mouse and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers. Supports high speed devices such as USB hard drives.
Seamless integration with the ADDERLink™ INFINITY range: The ALIF101T can integrate seamlessly into your existing ADDERLink™ INFINITY setup, replacing or working in conjunction with your existing ALIF endpoints. (Refer to manual on AIM firmware requirements for a matrix installation)
Perfect digital video: The ALIF101T uses an encoding system that is spatially-lossless, with 1:1 pixel mapping, so the digital video you receive is the same as the digital video leaving the remote computer ensuring the very best picture available and color accuracy.
Digital audio: The system can deliver USB stereo audio (bi-directional) or embedded video standard stereo audio (uni-directional).
EDID management: The system has intelligent EDID management to either allow the true characteristics of the monitor to be passed back to the computer, or controlled resolutions to be imposed.
Digital KVM matrix: Using the ADDERLink™ INFINITY Manager (AIM) you can turn multiple point-to-point extenders into a matrix system that allows any workstation to connect to any computer connected to the network.
Why not buy this Adder ALIF101T-DVI ADDERLink INFINITY High Performance ZeroU IP KVM A/V Extender Transmitter - DVI/USB2.0 today?
Adder ALIF101T-DVI ADDERLink INFINITY High Performance ZeroU IP KVM A/V Extender Transmitter - DVI/USB2.0 Specifications:
- Video resolutions
- The system supports resolutions up to 1920x1200 @60Hz
- Operating/storage conditions
- Operating temperature: 0 to 50°C/32 to 122°F
- Storage temperature: -10 to 60°C/14 to 140°F
- Storage and operating relative humidity: 10-90% non-condensing
- Altitude: <2000m
- MTBF: >500,000 hours
- Power
- USB power: 2x USB2.0 (2x 500mA @5V) 5W
- External power: 5VDC, 1A, (LPS)
- Typical power consumption: 3W
- BTU: 10.2BTU/hr
- Physical
- Dimensions: (L)110mm/4.3” x (W)55mm/2.17” x (D)25mm/1” with 30cm/11.8” cable length
- Weight: 0.2kg/0.4lb
- Materials: ABS and aluminum construction
- Connectors
- Computer: 1x DVI, 2x USB Type-A
- Ethernet: 1x 8p8c (RJ45)
- Power: 2.5mm socket
- Specification
- USB: USB2.0 Low, full and hi-speed
- USB features: Keyboard, mouse, touch and hard drives
- USB device seen as: 7 or 13 port hub
- Max video resolution: Up to 1920x1200 @60Hz
- Audio: Bi-directional USB audio 2 channel 16bit 48KHz
- Ethernet: 1GbE (No 10/100 support)
- Packing Box
- Dimensions: (L)292mm/11.5“ x (W)245mm/9.6” x (D)55mm/2.1”
- Weight: 0.5kg/1.1lb
- Cable types recommendations
- Cat5e and above
- Cable length rules
- Ethernet specifications rules apply 100m/300ft maximum run
- Approvals / Compliance
- CE and FCC
- UKCA & ICES and cULus
