This 7X1 HDMI Switch w/Remote & Optional RS232 switches 7 HDMI inputs to one HDMI output. It supports resolutions of up to 1080p & all specifications associated with HDMI v1.3 & is 2D & 3D compliant. It can be controlled with the front panel switches, remote control and optionally an USB & RS-485 Module. Unlike other switchers, this switch does not require human interface. Once a signal goes away the switcher will automatically change to the other input.
7X1 HDMI Switch Features:
- HDMI 1.3a compliance, support Deep Color 12 Bits/Color (Data rate up to 2.25Gbps)
- 2D and 3D capable
- Extends the range of HDMI compliant device by equalizing and re-clocking the HDMI signal
- Supports high resolution input: HDTV: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p @60Hz
- HDCP pass-through
- Adjustable LED brightness
- (*) Built in auto scan switching input function, to automatically select the next one with the signal of the input
- (*) Built in auto jump function, to automatically select the new video input
- Easy to use front panel control of switching or using the included remote control
- Optional RS-232 and PC Remote control via USB or RS-485 terminal devices. (Order separately above)
- Superb build quality to look good in your home theater
- Very accurate 100 ohm impedance to prevent detail robbing standing waves
- HDCP copy protection compliant
- Supports high resolution input
- HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant.
- Easy to install and simple to operate.
- Comes with a remote control
- 90 day warranty
(*) NOTE: A few devices like some DVR's, cable and satellite receivers are "always ON" so auto-sensing switchers, like these, need the "always On" devices, to be at a lower video input so it doesn't block other switcher devices. If you have 2 devices that are always ON you'll need to use the buttons and / or remote control ( if they have them ) to switch inputs. An Apple TV keeps its HDMI port active even in the sleep state so auto-switching may not work with the Apple TV. Manual switching can still be used.
Why not buy this 7X1 HDMI Switch today?
7X1 HDMI Switch w/Remote & Optional RS232 Features:
- Connector: HDMI Type A
- Input / Output: HDMI (Input) x 7、
- HDMI (Output)_ x 1
- Color depth: 12 Bits/Color (Data rate up to 2.25Gbps)
- Resolutions: 1080p (Max)
- Function Button: Button x 11
- Power Supply: 5V DC．1000mA Regulated ( External )
- Power Consumption: 600 mA (Max)
- Dimensions: 53 x 138.5 x 40 (mm)
- Shipping Weight: 805 g
Why not buy this 7X1 HDMI Switch today?
NOTE: A few devices like some DVR's, cable/satellite receivers are "always ON" so auto-sensing switchers, like these, need the "always On" devices to be at a lower video input so it doesn't block other devices. If you have 2 devices that are always ON you'll need to use the buttons and/or remote control (if they have them) to switch inputs. An Apple TV keeps its HDMI port active even in the sleep state so auto-switching may not work with the Apple TV. Manual switching can still be used.
This 7X1 HDMI Switch w/Remote Works With:
- Any high definition Dish Network and DirecTV receiver with HDMI outputs
- High definition TiVo's with HDMI outputs
- Any high definition cable receiver with HDMI outputs
- Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
- Any "Over The Air" (OTA) high definition receiver with HDMI outputs
- Sony PS3, HD DVD and Blu-ray DVD players
- Any Xbox360 with HDMI outputs
- Any upconverting DVD player with HDMI outputs
- Any DVHS VCR with HDMI outputs
- An Roku with HDMI outputs
- An Vudu with HDMI outputs
- An APPLE TV with HDMI outputs
- Many PC video card with HDMI outputs
- Any high definition camcorder with a standare HDMI out or an optional type C to standard HDMI cable
- Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
- Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
- and other similar devices.
Why not buy this 7X1 HDMI Switch today?
Q: How does auto-sensing work on your 7X1 HDMI Switch?
A: The operation of the 7X1 HDMI Switch auto-sensing will be impacted by the source devices operation in standby mode. If power is still applied to the HDMI output when the source is in standby mode, the switcher will treat this source as if it is it non. A few devices like some DVR's, cable and satellite receivers are "always ON" so auto-sensing switchers, like these, need the "always On" devices, to be at a lower video input so it doesn't block other switcher devices.
A: The operation of the 7X1 HDMI Switch auto-sensing will be impacted by the source devices operation in standby mode. If power is still applied to the HDMI output when the source is in standby mode, the switcher will treat this source as if it is it non. A few devices like some DVR's, cable and satellite receivers are "always ON" so auto-sensing switchers, like these, need the "always On" devices, to be at a lower video input so it doesn't block other switcher devices.
If you have 2 devices that are always ON you'll need to use the buttons and / or remote control ( if they have them ) to switch inputs. An Apple TV keeps its HDMI port active even in the sleep state so auto-switching may not work with the Apple TV. Manual switching can still be used.
There are some DVD equipments still have +5V signal output under power off status, it will cause auto jump and auto scan function abnormal, please disable auto jump and auto scan function to avoid any abnormal operation.
Why not buy this 7X1 HDMI Switch today?
HDTV Supply includes a 90 day Limited Warranty on this 7X1 HDMI Switch. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 90 days from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 90 days. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 3 and 5 Year Extended Warranty for this 7X1 HDMI Switch. Please go to Extended Warranties or see the above Options to purchase it.
