HDTV Supplys WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor switches both audio and video signals. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination. The WolfPackLite 1080p 60x60 HDMI Matrix Switch is designed to allow the switching and distribution of 60 HDMI inputs to 60 HDMI outputs. Control of the matrix is via an RS-232, IR, Software & front buttons. The matrix is housed in a 64x64 modular matrix card cage and includes 64-Separate 1080p HDMI to CAT6 POE Extenders with UTP lengths to 150 feet. It also has optional Crestron Modules & Control4 Drivers.
The WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor is a top of the line digital matrix switcher made for the demands of today's HDMI (High-Definition Multimedia Interface) routing. Created to route your systems HDMI signals to go to 60 outputs from 60 inputs, this 60x60 HDMI Matrix Switch delivers high performance.
Streaming between the source and display units is easily controlled through our HDMI 60x60 Matrix interface. HDCP key authentication will no longer be an issue when using our switcher. Control for our unit is varied and easily accessible. You can use our enabled RS-232 commands for advanced user control management as well the front-end panel display and the remote control that comes with it.
Internal Video Wall Processor: Not only is this product an HDMI matrix switch its output cards are specially designed to support the below video wall configurations. The creation of the video walls are via the matrices RS232 port (see the User Manual). You can even select from 16-presets to access often viewed video sets. Don't see what you want? Call 833-965-3722 right now to discuss your needs.
- 1x2, 1x3 thru 1x10 and more
- 2x1, 3x1 thru 10x1 and more
- 2x2, 2x3 thru 2x10 and more
- 3x3, 3x3 thru 4x4 and more
Example 1: Create a 2x2 Video Wall using 4-TVs with either one large picture or 4-individual pictures at one, or multiple locations.
Example 2: Create a 3x3 Video Wall using 9-TVs with either one large picture or 9-individual pictures at one, or multiple places.
What sets our WolfPackLite 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor apart from others:
- 1080p compliant, far better than competitors only 1080p
- Includes 64-Separate 1080p HDMI to CAT6 POE Extenders supporting up to 150 foot distances
- Expandable up to 64-HDMI in and 64-HDMI out cards
- HDMI 1.4 and HDCP 1.4 compliant
- 16 - Preset scenes that can be Saved and Recalled
- Closed Caption (CC) Pass-through
- Control via an remote control, RS232 & Front Buttons
- Free Lifetime Telephone, CHAT, TEXT and Email Tech Support from California
WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor Configuration:
- 1 - 16 -card in and 16 - card out card cage
- 15 - 4 - port HDMI input cards = 60 HDMI 1080p inputs
- 15 - 4 - port HDMI output cards = 60 HDMI 1080p outputs
- 60 - Separate 1080p HDMI to CAT6 POE Extenders with one power supply to 150 foot distances
WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor Features:
- Supports 3840 X 2160 @30 Hz & downward compatible
- Switching of up to 64 HDMI sources to 64 displays
- Built-in HDCP 1.4 internal management
- 16 - Presets to save for often used configurations
- Supports High Speed HDMI 1.4 Specifications (Deep Color, Lip Sync, and HD lossless audio formats)
- Supports full 1080p
- Supports DDC transmission
- Supports Dolby Digital-true HD, DTS-HD
- Control via an RS-232, IR, Software & front buttons
- Full RS-232 control-perfect for incorporating third party control systems
The WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor provides full HDCP internal management for todays integration in the commercial A/V market, ensuring HDCP key authentication and administering the handshake internally. Our WolfPackLite 1080p 60x60 HDMI Matrix Router with CAT6 Extenders comes with a full HDCP (High-bandwidth Digital Content Protection) internal management system that will eradicate any interception of your digital data. It also has optional Crestron Modules & Control4 Drivers.
Why not buy this WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor today?
WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor Specs:
- Fast Switching Circuitry
- Gain: 0 dB
- Bandwidth: 340 MHz (10.2 Gbit/s)
- Video Signal: HDMI (or DVI-D)
- Maximum Pixel Clock: 165MHz
- Resolution Range: Up to 1080p 4:2:0 chroma
WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor Input:
- Input: 60 HDMI
- Input Connector: HDMI 1.4
- Input Level: T.M.D.S. 2.9V/3.3V
- Input Impedance: 75Ω
- Output Impedance: 75Ω
WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders Output with Video Wall Processor :
- Output: 60 HDMI
- Output Connector: HDMI 1.4
- Output Level T.M.D.S. 2.9V/3.3V
WolfPackLite 1080p CAT6 Extenders Output Specs:
- 60-Separate 1080p HDMI to CAT6 POE Extenders to 150 feet with one AC adapter included
- Supports up to HDMI 2.0, HDCP 2.2/HDCP 1.4 and DVI 1.0 compliant
- POE design
- Secure screw-on AC Adapter cable
- Supports up to 18Gbps bandwidth
- Supports input and output video resolutions the maximum up to 1080p2K@60Hz RGB / Ycbcr 4:4:4 / Ycbcr 4:2:2
- Extends distances up to 164 feet / 50m
- Supports HDMI loop output on the Transmitter
- Supports copying of the EDID signal from transmitters or receivers display device
- Compact design for easy and flexible installation.
Other WolfPackLite 1080p 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor Specs:
- Input cable distance: ~25 feet AWG24 HDMI 1.4 high speed cable
- Output cable distance: ~35 feet AWG24 HDMI 1.4 high speed cable
- HDCP Management: Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.4 standards. The built-in HDCP management technology can analyze HDCP key authentication and realize handshake internally.
- 2-Serial Control Ports: RS-232, 9-pin female D connector with a pin configuration of 2 = TX, 3 = RX, 5 = GND
- IR Remote: Yes
- Front Panel Control: LCD Display
- Power Supply: 100VAC ~ 240VAC, 50/60Hz
Why not buy this 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor today?
HDMI Matrix Switcher User Manual
Why not buy this WolfPackLite 4K/30 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor today?
Reasons To Buy an HDTV Supply WolfPack Product
Why not buy this WolfPackLite 4K/30 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor today?
Why not buy this WolfPackLite 4K/30 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor today?
Control Drivers
DirecTV Controller
HDTV Supply has successfully installed our WolfPack, WolfPackLite and our other HDMI Matrix Switchers in Sports Bars, Restaurants, Bowling Alleys, Fitness Centers, Malls, Places of Worship, Data Centers, Gaming Rooms, Nail Salons, County Clubs, Casinos, Factories, Conference Rooms, Schools, Home Theaters or many other installations requiring HDMI matrix switching. The reason, we are told by the users, is the number of features we offer compared to other companies they looked at.
These modular HDMI matrix switcher can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.
For experienced hardware & software professionals who want to write their own drivers for 3rd party control systems from:
- AMX™
- Control4™
- Creston™
- RTI™
- DTVGameControl™
- Elan g!™
- Media switcher™
- OnControls™
- Savant™
- SimpleControl™
- SwitchItUp™
- SAVI Control™
- URC Control™
...we have created a simple and very easy to use RS232 script to write your own drivers.
EXAMPLE: If you want to switch input 8 to outputs 1, 8, 16, the RS232 commands would be command would be
- Input 8 to output 1: PH00WS0801NT
- Input 8 to output 8: PH00WS0808NT
- Input 8 to output 16: PH00WS0816NT
How to use the info:
END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:
- Call us for a quote
- Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.
CAVEAT: We are not certified by any of the above 3rd party control systems companies nor have the necessary hardware to verify, troubleshoot and support the 3rd party writing of the code. We do warranty, though, that the RS232 script in the above RS232 Users Manual has and will work to control the matrix directly.
Why not buy this WolfPackLite 4K/30 60x60 HDMI Matrix Switcher with CAT6 Extenders with Video Wall Processor today?
HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.
If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com
