HDTV Supplys High Speed 24 gauge Redmere HDMI cables with HDMI 2.0b and HDCP 2.2 compliancy connects 4K Ultra HD source devices to 4K UHD displays and projectors. The CL2 rated WolfPack Redmere HDMI Cable is designed using the worlds best Spectra7 HT8181 Redmere Chipset. This chipset only needs 5V at 5mA from the sources HDMI port and we have tested it with 32 of them on our 32x32 4K HDMI Matrix switch with excellent results.NOTE: All Redmere HDMI Cables are not made the same and the smaller the diameter (or gauge) of the 19-internal wires an HDMI cable has the more resistance, in ohms, that cable has that can impact the picture quality, especially a 4K at 60 Hz, 18GBPS signal. HDTV Supply manufactures this WolfPack Redmere HDMI Cables using large 24 gauge (AWG) wires assuring you better video and audio vs smaller diameter 28, 30 and 32 gauge HDMI cables. Always buy a 24 AWG (Gauge) HDMI cable if you want the best picture now and in the future. With HDTV Supply using the HT8181 module, you can now enjoy your favorite premium content on your large screen HDTV.
NOTE: These Redmere HDMI cables have a chip in them that must go at at the widescreen end. That end is the larger connector end. See the picture
HDMI cable with RedMere Equalizer Features:
- RedMere Technology
- Supports 3D
- Supports 4K x 2K and 1080p
- Includes Ethernet support
- Gold plated connectors for increased connectivity
- Active cable
- 24 AWG wires
- Extension chipset built into receiver
- 99.99% purity OFC
- 85% copper shielding
- In-wall rated
- Ethernet and 3D Capability
- Black
- Male to Male
Spectra7s patented high-speed, active signal processing enables super-thin, ultra-long cables and compact connectors capable of delivering up to 18Gbps, 2160p video resolutions, key performance attributes of HDMI 2.0a. The HT8181 utilizes patented power delivery technology for increased power regulation efficiency no additional power cable required. The HT8181 module achieves up to 4K 60p, 4:4:4 resolutions (600MHz pixel clock rate) required by the latest Ultra-HD 4K Displays.
Why not buy this 4K WolfPack 50 Foot Redmere HDMI cables with HDMI 2.0a & HDCP 2.2 today?
HDMI cable with RedMere Equalizer Specs:
- Optimized for super-thin, extra-long cable designs capable of recovering losses up to 30dB when used with an HDMI 2.0 compliant receiver Linear output drivers ensure superior audio and video performance
- Enhanced, patented power harvesting technology. No external power required.
- Supports data rates up to 18Gbps (6Gbps per ™DS Channel) for 4k 60fps 4:4:4 performance
- Integrated equalizers, linear output drivers, voltage regulators, control, and input terminations
- Sophisticated RT8000 production test system ensures 18Gbps performance and HDMI 2.0 interoperability
- Compact module design
More Redmere HDMI cable with Specs:
- Contains CLX1601 for HDMI active cable Retiming Buffer
- Separate data equalization performed for each channel for up to 6GBps
- Wide Frequency Range：25MHz-600MHz
- Supports 12-bit Deep Full HD，Full 3D and 4K2K 60Hz video
- Module PCB size 16 mm x 14 mm
- Compatible with standard A type connector
- Support AC-coupling at ™DS inputs for level shifting
- HBM ESD protection up to 6KV
- Supports 3D;
- Supports 4K x 2K and 1080p;
HDMI cable with RedMere Equalizer FAQ:
- Equalizes the channel response out to 4.1GHz
- Enables cables to pass HDMI Category 2 loss mask
- Preserves muted signal states and lower power states in HDMI receiver
- Supports data rates up to 6Gbps per channel
- Equalizes all four TMDS channels
- Linear equalization fully allows sink-EQ to adapt and further equalize the signal
- Optimized EQ and configuration settings burned during cable production with RT-Tester
- Compact 3.2mm x 1.6mm 32 ball CSP for smallest silicon footprint
- No external power needed
- Only draws 5mA off the HDMI 5V line
DirecTV Controller
HDMI 2.0 out to the full 18 Gbps, but Flickinger says the product has “some interesting new technologies to make even the 10-meter cables transparent to an HDMI 2.0 signal.”
For starters, the cables feature the newer HDMI 2.0 Spectra7 (RedMere) HT8181 chipset with custom-programmed EQ curves for the specific cable types and lengths.
In addition, they include a symmetrical rise time accelerator for both the HDCP and EDID data and clock lines on the I2C bus (display data channel), a custom clock amplifier, and intra-pair skew correction circuit.
“This eliminates EDID errors and, because this repair is bi-directional, ensures that the HDCP handshaking occurs reliably,” according to Metra.
Clock amplification and intra-pair skew correction guarantees signal integrity and synchronization, the company claims. In addition, a 100-millisecond delay on the Hot Plug Detect signal assures the HDMI source device receives the EDID information correctly from the sink.
