This 4x1 Stereo Audio & Composite Video Switcher switches 4 composite + audio inputs to one composite + audio output.

4x1 Stereo Audio & Composite Video Switcher Features:

• One Wideband Composite Video Channel: Guaranteed 120 MHz bandwidth.
• Two Stereo Analog Audio Channels: Very low noise/distortion specifications.
• NTSC and PAL compatible
• The Video Channel can be used for switching COAX Digital Audio (PCM/DTS/AC3).
• Optionally Remote Controllable: Discrete IR Codes.
• Optional Remote Control.
• Optional RS-232 Serial option for direct computer control.
• Interface Cable Included.
• Small Size: Only 2" x 6" x 4".
• Actually made in the USA!!!
• Easily integrated with other 4X series components.

The circuitry inside the 4x1 Stereo Audio & Composite Video Switcher uses only the best components for ZERO degradation of audio and video signals. The ICs used for each signal path are specifically designed for the type is signal being switched. The result is a very low noise/distortion and flat frequency response output for both Audio and Video. Typical applications include combining 4 different A/V sources such as VCRs, DVDs and Camcorders to one common output. Although the 4x1 Stereo Audio & Composite Video Switcher is primarily used for switching Stereo Audio and Video, the video channel can be used to switch Coax Digital Audio. This arrangement would allow both types of audio (Analog and Digital) to be switched at the same time and is perfect as a 4 input expansion for any Hi-End Audio System. Control of your 4x1 Stereo Audio & Composite Video Switcher is provided through a front panel switch which cycles through the inputs. It is also used to program the Remote Control characteristics. The 4x1 Stereo Audio & Composite Video Switcher optionally comes with a Remote-Control to directly access any of the 4 inputs. The HDTVAV4X-R uses the same remote as our RGB4X-R component video switcher. The optional Remote Control has 10 buttons with only 5 are active at one time. The unit comes programmed to respond to the left side column of buttons. You can program the unit to switch using the right side buttons, if desired. This facilitates using two HDTVAV4X-Rs in a system and having independent control over both. Perform the following to reprogram the HDTVAV4X-R:

• Remove power from the unit by unplugging the 12VDC Connector
• Press and hold the front panel button
• Apply power to the unit.
• Release the front panel button after the display stops blinking.

Each time you perform this operation you are alternating the button group used on the IR remote.

Why not buy this 4x1 Stereo Audio & Composite Video Switcher today?