This WolfPack 4K 30 Hz HDMI Over IP Matrix Switcher with Apps family sends & receives a 4K 30 Hz HDMI video/audio signal to up to 450 feet in a 4K 30 HDMI format with CAT6. It includes multiple POE HDMI 4K Transmitters (TX) and POE 4K HDMI Receives (RX). They are installed using 1 piece of a twisted pair CAT6/7 cable and are transmitted digitally over that single cable without any signal loss.
It is a true AV Over IP matrix switcher allowing any input to be routed to any output; or the same input to be routed to all outputs, or any combination
Internal formats of MPEG4-AAC and LPCM stereo adapt to available network bandwidth if needed. It supports both H.264 & H.265 (switchable). Since this uses H.264/265 technology our 4K AV over IP system total bandwidth is 1G. Either with 4K30 input or Quad-view outputs, the total bandwidth never exceeds 1G.
4K 30 Hz HDMI Over IP Matrix Switcher with Apps Features:
- Real Time Video Preview of all Sources on any Wireless Tablet
- Real time video seen on a tablet
- 4K 30 Hz AV Over IP Technology with Live Streaming
- Video Wall Support to any size or quantity of TVs
- Supports Multi-view
- Uses one extender for TX and RX (setup in PC software)
- Unlimited Sources
- Unlimited Computers
- Unlimited KVM
- Unlimited HDMI In & Out
- Any In to Any Out
- Wireless iPad and Android Tablet control
- Any size video walls
- Any quantity video walls
- Optionally 90°, 180° & 270° rotation
- USBs
- Uses CAT6 for conection
- No Monthly License fees
- Extends a 4K 30 Hz signal to 300' w/CAT6
- H.265 protocol
- SEC Security Compliance
- HDCP compliant
- 4K 30 Hz video over 1G Switch
- 80ms Switching & Latency
- Separate Audio Outs
- Scalable Ins & Outs
- Rack mountable (Rack Mount Available)
- Windows Software Support
- Unlimited Field Upgradeable
Our 4K 30 Hz HDMI Over IP Matrix Switchers also supports 4K30 KVM. Also, unlike a traditional card cage matrix, you only buy the exact input and output combination you need, saving you money by not buying unused ports.
The unique feature of these 4K 30 Hz HDMI Over IP Matrix Switchers are that the transmitter and receivers are the same unit, and you just select what you want them using the PC software.
These WolfPack 4K HDMI Over IP Switchers use the H.265 technology to work together with WolfPack 4K Transmitters (POE Encoders) and 4K Receivers (POE Decoders) to provide a complete end-to-end streaming system. They can also provide a video wall up with input and output HDMI resolutions supporting up to 4K 30 Hz. .
Features That Separate our WolfPack 4K 30 Hz HDMI Over IP Matrix Switchers with Apps from the Competition:
- Wireless Real Time Video Preview: See the video on the iPad what is showing on the TVs, or from the sources, with its App
- Any in, to any out, in any combination
- Includes Video Wall Processing
- Consists of 4K Transmitters, 4K Receivers & 4K Ethernet Switch (all POE)
- Support 1-HDMI output with Video Wall function (Maximum 16-windows on one screen)
- Supports 1-3.5mm audio input and 3.5mm audio output
- Supports 1-RJ45 (10M/100M/1000M) with POE function
- Supports 1-RS232, 1-485 port and 4-I/O ports
- Supports 2-USB 1.1 and 1-USB A
- The resolution up to 4K 30Hz & 1080p @ 60hz for HDMI, D1@60, CIF@60fps
- Add, remove & relocate sources & TVs at anytime
- Android Tablet App (XView)
- iOS Tablet App (XView)
- Supports Windows Compatible & Software (XView)
- POE design so it doesn't require AC adapters
- Static IP sets the IP addresses
- Extends the signal 300' in & out of the Ethernet switch with CAT6/5e
- Extends the signal 450' in & out of the Ethernet switch with CAT6/7
- Switchable H.264 or H.265 protocol for the best picture
- Turn all TVs OFF & ON if TVs have RS232
- HDMI 1.4 & HDCP 1.4 compliant
- 4K 30 Hz video over a 1G Switch
- Supports resolutions up to 4K 30 Hz at a colorspace of 4:2:0
- 80-100ms Latency
- 80-100ms Switching Time
- Separate audio
- Supports scalable in & out matrix configurations
- Field Upgradeable
Wireless iPad Real Time Video Preview of Every Source Device: Along with the other major features like POE, separate audio and creating video walls, a key feature is our Wireless iPad Real Time Video Preview. That means if you build your own matrix and pick the optional wireless iPad control your iPad will show in real time the videos that are on, say, all your DirecTV receivers...again, all of them. If you have 12-DirecTV receivers all set to different channels you'll see 12 different real-time videos, not pictures, real-time video. .
If it is a DVD playing, you'll see that real time video also. This wireless iPad real time video preview sets us apart from all the other lame ducks who make you run to the TVs to see what's playing. Only at HDTV Supply can you get this feature. If you need to change the channel just then go to your DirecTV receiver and change it as you no longer must run out to your sports bar floor, factory, or other installations to see whether it changed or not..
The HDMI Receiver Over IP allows you to simultaneously support an HDMI 1.4 Signal (including 4K 30 Hz) to one or more TVs, HDMI video projectors or LCD Panels using one CAT6/7 cable over a standard Ethernet infrastructure.
Internal Video Wall Processor: Not only is this product an HDMI matrix switch, but it is also specifically designed to support the video wall configurations below.
Our WolfPack™ 4K HDMI Over IP Matrix Switchers uses TCP/IP network technology and can have a full HD HDMI signal transmitted and distributed to 100m or 300 feet with CAT6/5e and 400 feet with CAT6/7. The local and remote units can be connected for a point-to-point connection, or through VLAN isolation on a managed network switch for a multipoint-to-multipoint configuration.
Example 1: Create a 2x2 Video Wall using 4-TVs with either one large picture or 4-individual pictures at one, or multiple locations.
Example 2: Create a 3x3 Video Wall using 9-TVs with either one large picture or 9-individual pictures at one, or multiple places.
Fast Seamless HDMI Switching: These HDMI over IP Matrix Switchers deliver instantaneous video switching with full 4K 30 Hz video at each port. .
This high-performance engine processes HDMI signals by executing EDID hops and HDCP handshakes simultaneously at both the source input, the display outputs and scales the inputs for the best output resolution. It sets the output clock timing and uses a frame buffer to retain the input signal information for the fastest output.
Separate Embedded Audio In and De-embedded Audio Out: These HDMI over IP Matrix Switchers allow you to display video with separate audio coming from another audio source as it supports embedding the audio on the HDMI TXs connector and then de-embedding the audio on the HDMI RXs connector.
EXAMPLE: Build a WolfPack 4K 12x32 HDMI Over IP Matrix System with Video Wall, Real Time Video Preview, Fast Switching & Separate Audio:
- 14 - 4K POE HDMI to IP Transmitters extending to 450 feet with CAT6
- 32 - 4K POE HDMI to IP Receivers extending to 450 feet with CAT6
- 1 - Rack mount 48-Port 1G IGMP POE Ethernet switch
- 1 - Wireless Access Point
- 2 - Rack mount kits for up to 12-TXs or RXs
Why not buy a 4K POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
4K HDMI TX or 4K RX Over IP Specs:
- Resolutions Supported:
- 640 x 480@60Hz
- 480p@60Hz,
- 576P@50Hz,
- 800 x 600@60Hz,
- 1024 x 768@60Hz,
- 720p@50Hz, 720p@60Hz,
- 1280 x 800@60Hz,
- 1280 x 1024@60Hz,
- 1366 x 768@60Hz,
- 1400 x 1050@60Hz,
- 1440 x 900@60Hz,
- 1680 x 1050@60Hz,
- 1920 x 540@60Hz,
- 1080p@24Hz,
- 1080p@25Hz,
- 1080p@30Hz,
- 1080p@50Hz, 1080p@60Hz
- 4K@30 Hz
- HDMI 1.4 and HDCP 1.4
- POE or can be powered using provided power supply
- Software for IP address, video wall, EDID etc settings
- Supports to rename the sources and displays
- 3.5mm audio embedded and de-embedded on TX and RX
- EDID preset/learning
- Low latency About 50 ms (Low latency mode) & About 250 ms (High quality mode)
- Supports both a Video Wall mode and a matrix switch mode
- Supports iPad and Android APP control with preview function
4K HDMI TX or 4K RX Over IP Set Includes:
- 1 - 4K HDMI Over Ethernet TX or RX unit
- 1 - 12V 1A power adapter
4K HDMI TX or 4K RX Over IP Specs:
- Input TMDS signal: 1.2 volts (peak-to-peak)
- Input DDC signal: 5 volts (peak-to-peak)
- HDMI Connector: 19 pin type female connectors
- RJ-45 Connector
Why not buy a 4K POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
NOTE: All these HDMI Matrix Switchers Over LAN systems, unless otherwise noted, require a dedicated HDMI video system with its own Ethernet switch and not attached to your existing LAN system due to the unknown bandwidth impact on the HDMI video from your network. The design needs to meet these specs:
- One Dedicated VLAN
- No other network appliances in the VLAN
- Not the same as an existing "Multicast VLAN"
- Unique subnet
- No other network appliances in the subnet
Using all the systems in a single dedicated VLAN to keep them from interfering with the rest of your VLAN. With all devices in a single VLAN, switching sources involves modifying the IP of the Receiver rather than actively manipulating the VLAN configuration of the managed switch. See hundreds below if you can create a dedicated HDMI Video system over a VLAN based upon the above criteria.
When a stacked switch is used, the video bandwidth usage for Transmitters needs to be considered as the stacking cables that connect switches have a maximum bandwidth capability that is much lower than if a single switch is used. Connecting stacked switches together requires specialized stacking cables. Please call us at 833-WOLFPACK (833-965-3722) for more.
Why not buy a 4K POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
A: Yes, the transmitter and receiver both have the 3-pin audio output.
Q: How do you test before you ship my system?
A: We put the products in the heating room for 12 hours for aging and have all the products turned On and the temperature of the heating Room set to 140 degrees. If anything fails, we replace the failed unit and start the test over again.
Q: Is it a picture of a screen or full-motion video?
A: The preview of both sources and the Video wall is with full-motion video.
Q: Is there audio with the Tablet Preview screen?
A: No, the preview on the iPad will not have the audio function.
Q: Can there be more than one showing?
A: For the source preview, it can be showing all the sources. The TV/Video Wall will only be showing the one we selected.
Q: Is it a source only?
A: This preview is for both input sources, and the selected TV or video wall
Q: Can it be at TV at the destination?
A: Do you mean to have this preview function on the TV? If so, it's not able to do it, as the preview function is only available on the iPad APP. Unless we wirelessly share/mirror the iPad to the Apple TV by airplay.
Q: Can there be text written below the picture or video?
A: We can add the OSD picture on any position of the TV. I am working on a demo video of this, but this will need to use the PC control software to add.
Q: If it is a satellite receiver can you change the channel?
A: No, we will only be able to preview the contents, but not able to change the channels
Q: If a DVD is playing do you see a picture?
A: Yes, we will see the same contents as the DVD plays.
Can the Ethernet switches be cascaded and still act as a matrix?
A: Yes. The network switches can be cascaded and still act as a large matrix.
Q: How do you change the IP and MAC address of the transmitters and receivers?
A: You can set up the IP and MAC on the iPad app or PC control software, but we recommend using the automatic IP and MAC address, so it can support plug and play.
Q: The Transmitters and Receivers both have Audio out on the receiver can the audio be matrixed such as Receiver A sends audio out to Receiver B, if using the audio out?
A: The audio out on both the RX and TX are the corresponding audio with the video so its audio function is only an extract function from the video and is not able to do as an audio matrix.
Q: What is the distance with POE in and out?
A: With the POE, the input can up to 100m (330 ft) at 1080p@60Hz and the output also is 100m (330 ft)
Q: What is the distance without POE using the AC adapters in and out?
A: It is also the same distance as the POE distance as in and out both are 100m (330 ft)
Q: What type of UTP cable do you recommend?
A: As it's used for a video signal transmission, we recommend using the STP 868B cable
Q: Can you use CAT6 - 5E - 6 and 7 and is there a difference in length of cables?
A: We did the tests here with the CAT6/CAT6/Cat6/Cat7 cable and the CAT6 and CAT7 are the best and can reach 100m with POE
Q: Please give us an explanation of when the large and small streaming resolutions would be used?
A: The highest resolution can up to 4K@30Hz, the lowest resolution is 680x480@60Hz but that resolution can't support the IP camera decoding
Q: Does the iPad control require a wireless router?
A: Yes, it will need a WIFI router connected in the same system
Q: You also recommend Managed POE switches, correct?
A: We tested on several POE network switches and so far both managed POE and the non-managed POE network is working well. But the managed network switch is more stable and it's fanless which is quieter.
Why not buy a 4K POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.
If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com
How to set up an HDTV925 4K 30 Hz AV Over IP System
Link to Software APPs and a video on setting up the Plug & Play version
User Manual for 4K 30 Hz HDMI Over IP Matrix Switcher with Xview Control
WolfPack 4K 30 Hz HDMI Over IP Matrix Switchers Brochure
Assembly Guide for TX & RX Rack Mount Kit
UDP Commands for WolfPack 4K 30 Hz HDMI Over IP Matrix Switchers
