This Professional WolfPack 1080p 1x4 CAT6 Splitter is a four-way HDMI splitter & distributes 1-HDMI input to up to 4 identical CAT6 signals. The 4 outputs are synchronized and only one CAT6/7 cable is required going to the TVs.
The HDMI Splitter over CAT6 chip-set includes a chip to make sure the sound and the picture are in sync and no delays occur between them. 4-Receivers plus their AC adapters are included.
WolfPack 1x4 HDMI over CAT6 Splitter Features:
- Plug and play.
- Support one HDMI Loop-out.
- Support EDID Setting function.
- Support 20~60KHz IR pass back.
- Wall-mounted function, easy installation.
- Compatible with CAT6/6a/7 network cables.
- The transmission distance is up to 40m/131ft.
- The highest resolution supported is 1920x1080@60Hz.
- Support power from the transmitter to the receiver unit over the CAT6 cable.
- Distribute 1 HDMI source to 4 HDMI displays over network cables? simultaneously.
- Support 20~60KHz IR pass back.
- Wall-mounted function, easy installation.
- Compatible with CAT6/6a/7 network cables.
- The transmission distance is up to 40m/131ft.
- The highest resolution supported is 1920x1080@60Hz.
- Support power from the transmitter to the receiver unit over the CAT6 cable.
The 1X4 HDMI Splitter via Single CAT6 is a product for splitting and extending your HDMI signal over long distances to a compatible display. It is designed to convert the HDMI signal and transmit by Internet cable.
It also supports the Transfer of Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source on the Sink side which is 50 meters outside, also you can control the Sink on the Source side which is 50 meters outside using the Splitter.
