This WolfPack 4K 30 Hz 12x30 AV Over IP POE Matrix Switch sends & receives 4K 30 Hz HDMI video and audio signals to up to 450 feet in a 4K 30 Hz HDMI format via one CAT6 cable. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination.
The AV Over LAN Matrix Switcher includes multiple HDMI 4K 30 Hz POE Transmitters (TX) and multiple 4K 30 Hz HDMI POE Receivers (RX). They are installed using a single CAT6 cable and are transmitted digitally over that single cable without any signal loss. It supports H.265 with 10-bit color and a high dynamic range of color for the best video and audio available today.
The unique feature of this 4K 30 Hz 12x30 AV Over IP Matrix Switcher is that the Transmitters (TXs) and Receivers (RXs) are the same unit, and you just select what you want them by using the PC software. Also, since this uses H.264/265 technology our 4K 30 Hz AV over IP system total bandwidth is only 1G. Either with a 4K 30 Hz input, or Quad-view outputs, the total bandwidth never exceeds 1G.
4K 30 Hz 12x30 AV Over IP Matrix Switch Configuration:
- 12 - 4K 30 Hz HDMI to IP POE Transmitters to 450'
- 30 - 4K 30 Hz HDMI to IP POE Receivers to 450'
- 1 - Rack mount 48-Port 1G IGMP Ethernet switch
- 1 - Rack Mount Kits for up to 10-POE TXs or RXs
- 1 - WiFi Access Point for Tablet Control
4K 30 Hz 12x30 AV Over IP Matrix Switcher Features:
- Wireless iPad and Android Tablet Real Time Video Preview of all sources
- Real time video seen on a tablet
- 4K 30 Hz AV Over IP Technology with Live Streaming
- Scrolling Text ***
- Video Wall Support (setup in PC software)
- Uses one extender for TX and RX (setup in PC software)
- Unlimited Sources
- Unlimited Computers
- Unlimited USB
- Unlimited HDMI In & Out
- Any In to Any Out
- Wireless iPad and Android Tablet control
- Any size video walls
- Any quantity video walls
- Optionally 90°, 180° & 270° rotation
- USBs
- Uses CAT6 for conection
- No Monthly License fees
- Extends a 4K 30 Hz signal to 450' w/CAT6
- H.265 protocol
- SEC Security Compliance
- HDCP compliant
- 4K 30 Hz video over 1G Switch
- 80ms Switching & Latency
- Separate Audio Outs
- Scalable Ins & Outs
- Rack mountable
- Windows Software Support
- Unlimited Field Upgradeable
Our 4K 30 Hz 12x30 AV Over IP Matrix Switchers supports 4K 30 Hz Live Streaming as well as KVM.
These WolfPack 4K 30 Hz 12x30 HDMI Over IP Switchers use the H.265 technology to work together with WolfPack 4K 30 Hz Transmitters (POE Encoders) and 4K 30 Hz Receivers (POE Decoders) to provide a complete end-to-end streaming system. They can also provide a video wall up with input and output HDMI resolutions supporting up to 4K 30 Hz. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination.
Wireless iPad and Android Tablet Real Time Video Preview of Every Source Device: Along with the other major features like POE, separate audio and creating video walls, a key feature is our Wireless iPad and Android Tablet Real Time Video Preview. That means if you build your own matrix and pick the optional wireless iPad control your iPad will show in real time the videos that are on, say, all your DirecTV receivers...again, all of them. If you have 12-DirecTV receivers all set to different channels you'll see 12 different real-time videos, not pictures, real-time video. If it is a DVD playing, you'll see that real time video also. This wireless iPad real time video preview sets us apart and only at HDTV Supply can you get this feature.
Internal Video Wall Processor: Not only is this product an HDMI matrix switch, but it is also specifically designed to support the video wall configurations below. Use the PC software to create video walls. Our WolfPack™ 4K 30 Hz HDMI Over IP Matrix Switchers uses TCP/IP network technology and can have a full HD HDMI signal transmitted and distributed to 100m or 300 feet with CAT6/5e and 450 feet with CAT6/7.
It supports Video Walls with Picture-in-Picture (PIP)
Example 1: Create a 2x2 Video Wall using 4-TVs with either one large picture or 4-individual pictures at one, or multiple locations.
Example 2: Create a 3x3 Video Wall using 9-TVs with either one large picture or 9-individual pictures at one, or multiple places.
...and more, all easily created using the PC software
Fast Seamless HDMI Switching: These HDMI over IP Matrix Switchers deliver instantaneous video switching with full 4K 30 Hz video at each port. This high-performance engine processes HDMI signals by executing EDID hops and HDCP handshakes simultaneously at both the source input, the display outputs and scales the inputs for the best output resolution. It sets the output clock timing and uses a frame buffer to retain the input signal information for the fastest output.
Separate Embedded Audio In and De-embedded Audio Out: These HDMI over IP Matrix Switchers allow you to display video with separate audio coming from another audio source as it supports embedding the audio on the HDMI TXs connector and then de-embedding the audio on the HDMI RXs 3.5mm connector.
For setting up this AV over IP system, we have:
DesignEditor - to customize xview with your logo
xview - Setup TX and RX, IP address matrix switch and video wall setup
dvstool - This is the Android APP
dvstool (iPad only)
Why not buy a 4K 30 Hz POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
4K 30 Hz AV Over IP POE Matrix Switch:
- Resolutions Supported:
- 640 x 480@60Hz
- 480p@60Hz
- 576P@50Hz
- 800 x 600@60Hz
- 1024 x 768@60Hz
- 720p@50Hz, 720p@60Hz
- 1280 x 800@60Hz,
- 1280 x 1024@60Hz
- 1366 x 768@60Hz
- 1400 x 1050@60Hz
- 1440 x 900@60Hz
- 1680 x 1050@60Hz
- 1920 x 540@60Hz
- 1080p@24Hz
- 1080p@25Hz
- 1080p@30Hz
- 1080p@50Hz
- 1080p@60Hz
- 4K@30 Hz
- Supports HDMI 1.4 and HDCP 1.4
- Supports POE or can be powered using provided power supply
- IP settings done in PC software
- Supports renaming the sources and displays
- 3-pin audio de-embedded on TX and RX
- EDID preset/learning
- Low latency About 50 ms (Low latency mode) & About 250 ms (High quality mode)
- Video Wall mode and matrix switch both modes
- Supports iPad and Android Tablet APP control with preview function
- Input TMDS signal: 1.2 volts (peak-to-peak)
- Input DDC signal: 5 volts (peak-to-peak)
- HDMI Connector: 19 pin type female connectors
- RJ-45 Connector
Why not buy a 4K 30 Hz POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
Q: Does the transmitter have an audio out?
A: Yes, the transmitter and receiver both have the 3-pin audio output.
Q: How do you test before you ship my system?
A: We put the products in the heating room for 12 hours for aging and have all the products turned On and the temperature of the heating Room set to 140 degrees. If anything fails, we replace the failed unit and start the test over again.
Q: Is it a picture of a screen or full-motion video?
A: The preview of both sources and the Video wall is with full-motion video.
Q: Is there audio with the Tablet Preview screen?
A: No, the preview on the iPad will not have the audio function.
Q: Can there be more than one showing?
A: For the source preview, it can be showing all the sources. The TV/Video Wall will only be showing the one we selected.
Q: Is it a source only?
A: This preview is for both input sources, and the selected TV or video wall
Q: Can it be at TV at the destination?
A: Do you mean to have this preview function on the TV? If so, it's not able to do it, as the preview function is only available on the iPad APP. Unless we wirelessly share/mirror the iPad to the Apple TV by airplay.
Q: Can there be text written below the picture or video?
A: We can add the OSD picture on any position of the TV. I am working on a demo video of this, but this will need to use the PC control software to add.
Q: If it is a satellite receiver can you change the channel?
A: No, we will only be able to preview the contents, but not able to change the channels
Q: If a DVD is playing do you see a picture?
A: Yes, we will see the same contents as the DVD plays.
Can the Ethernet switches be cascaded and still act as a matrix?
A: Yes. The network switches can be cascaded and still act as a large matrix.
Q: Is it a WEB GUI control or PC software
A: It is a PC control software-based system for configurations like CEC settings, resolution, image rotating, etc . It also has an optional iPad app and does not have a web GUI.
Q: How do you set up the video wall?
A: For the video wall set up, you can do it in the PC sofware.
Q: How do you change the IP and MAC address of the transmitters and receivers?
A: Setup is done using the PC software.
Q: The Transmitters and Receivers both have Audio out on the receiver can the audio be matrixed such as Receiver A sends audio out to Receiver B, if using the audio out?
A: The audio out on both the RX and TX are the corresponding audio with the video so its audio function is only an extract function from the video and is not able to do as an audio matrix.
Q: On the IP control box there are (2) LAN ports, would that be for 2 separate LANs?
A: We will only need to use the LAN 1 for the controlling & settings and for the broadcast version:
- LAN1 (AV/POE): To connect with the network switch use the PC control software to control this system
- LAN2 (C): To connect with the network switch this is used for a 3rd party to use the IP control this system
Q: What is the distance with POE in and out?
A: With the POE, the input can up to 100m (330 ft) at 4K 30 Hz and the output also is 100m (330 ft)
Q: What is the distance without POE using the AC adapters in and out?
A: It is also the same distance as the POE distance as in and out both are 100m (330 ft)
Q: What type of UTP cable do you recommend?
A: As it's used for a video signal transmission, we recommend using the STP 868B cable
Q: Can you use CAT6 - 5E - 6 and 7 and is there a difference in length of cables?
A: We did the tests here with the CAT6/CAT6/Cat6/Cat7 cable and the CAT6 and CAT7 are the best and can reach 100m with POE
Q: Please give us an explanation of when the large and small streaming resolutions would be used?
A: The highest resolution can up to 4K@30Hz, the lowest resolution is 680x480@60Hz but that resolution can't support the IP camera decoding
Q: Does the iPad control require a wireless router?
A: Yes, it will need a WIFI router connected in the same system
Q: You also recommend Managed POE switches, correct?
A: But the managed network switch is more stable.
Why not buy a 4K 30 Hz 12x30 POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.
If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com
How to add the IPC to the HDTV925 AV over IP system
Operation Guide for DesignEditor Software
Operation Guide for Operation Guide for DVSTool_xview Software
Videos Hide Videos Show Videos
-
How to Add IP cameras to the 4K30 AVover IP system
-
How to Setup the Video Wall, Matrix and Zones
-
How to upload the Xview settings to iPad or Android Tablets App DVSTool Control.
-
How to change the IP address for the 925s
-
How to upload the PC Xview Setting and Configuration to a 7-inch touch control screen
-
4K AV over IP System with PC software, App control
