WolfPack 4K 30 Hz 1x12 POE HDMI over IP Splitter to 330 Feet with IR

WolfPack

$1,525.00
Part Number:
1x12-IP-SPLITTER
UPC:
603134695380
Availability:
In Stock
1:
4K 30 Hz 1x12 HDMI over IP Splitter
2:
Sends & Receives 4K 30 Hz UHD 330' w/Zero Latency
3:
POE Design & Field Expansion to more TVs
4:
30-Minute Install Showing Gorgeous 4K 30 Hz Video
HDTV Supplys WolfPack™ 4K 30 Hz 1x12 HDMI over IP POE Splitter is a simple to install, preconfigured 1x12 HDMI distribution amp using a POE Ethernet switch.

What sets this 4K 30 Hz POE 1x12 HDMI over IP Splitter apart from others:

  • 4K/30 UHD Compliancy
  • POE Design - No AC Adapters Needed
  • Supports HDMI In & Out
  • Zero Latency
  • Sends 4K HDMI up to 330 feet
  • Field upgradable to 253 - 4K TVs
  • No software needed, plug-n-play

This POE HDMI video splitter over IP allows for the distribution and switching of high definition 4K video signals using off-the-shelf Gigabit IGMP POE switches. This WolfPack HDMI over IP Extender uses POE Gigabit IP network technology to process and distribute 4K ultra-high-definition video signals. The WolfPack HDMI extender supports POE point-to-point or 1-TX to 253 RXs over gigabit PoE switch and can also support multi-slave control of a host's networking.

WolfPack 4K 1x12 HDMI over IP Splitter is preconfigured with:

  • 1 - 4K HDMI to LAN POE Transmitter (TX)
  • 12 - 4K LAN to HDMI POE Receivers (RX)
  • 1 - Companion 16 port POE Ethernet switch

The HDMI over IP POE Splitter resolution supports 4K@30Hz 4:2:0 Ultra HD and is completely lossless, has low latency, supports full-format HDMI audio, fully meets the audio-visual needs of high-end customers. A POE Gigabit switch is included.

Why not buy this WolfPack 4K 1x12 HDMI over IP Splitter today?

You don't have to have any IP or LAN knowledge as there are no settings you have to worry about, just Plug-N-Play. This preconfigured 4K 1x12 HDMI over IP Splitter allows for the distribution of high definition 4K video and audio signals using off-the-shelf Gigabit IGMP managed switches. The 4K 1x12 HDMI over IP Splitter uses advanced HDbitT technology supporting video resolutions up to 4K Ultra HD. It can be used in Churches, Factories, Restaurants, Sport Bars and more.

HDMI over IP Splitter Transmitter & Receiver Features:

  • Plug and play.
  • Apply advanced POE over IP technology.
  • Transmission distance is up to 100 meters or 330 feet via CAT6
  • Resolution supported is up to 4K@30Hz ultra HD.
  • Supports L/R stereo audio.
  • Supports up to 253 receivers.
  • Compliant with HDMI 1.4 and HDCP 1.4 standards.
  • Audio and video are transmitted digitally over an 100 Ohm CAT6 cable for lower signal loss.
  • 10/100Mbps POE Ports Switch
  • HDMI signal: HDMI 1.4 and HDCP 1.4 compliant
  • HDMI input resolutions supported:
    • 480p@60Hz
    • 720p@50/60Hz
    • 1080p@30/50/60Hz
    • 4Kx2K @30Hz
  • Audio format supported: L/R stereo audio
  • TMDS signal: 0.7~1.2Vp-p
  • DDC signal: 5Vp-p
  • Color: Black

The 4K 1x12 HDMI over IP Splitter uses advanced technology supporting a video resolution up to 4Kx2K@30Hz Ultra HD. Configure any-size HDMI splitter using HDMI over IP receivers with only the number of ports available on the Ethernet LAN switch limiting the in & outs of your design. Multiple receivers can simultaneously connect to a transmitter to form a virtual HDMI splitter with up to 253 HDMI receivers (TVs).

Why not buy this 4K 1x12 HDMI over IP Splitter today?

Frequently
Reasons To Buy an HDTV Supply WolfPack Product

Why not buy this 4K 1x12 HDMI over IP Splitter today?