By having 4-port slide in Boards the matrix is very reliable as in the unlikely even there is a loss of signal you just replace the 4-port Board with a spare you have purchased or order another from us. The complete matrix doesn't have to be sent to us for a repair. This 4-port HDMI Input Board is used with the below HDTV Supply WolfPack matrix switchers:
- 48x48 Chassis size
- 56x56 Chassis size
- 64x64 Chassis size
- 72x72 Chassis size
- 80x80 Chassis size
- 160x160 Chassis size
HDBaseT Input Board Feature:
- Supports one 4-HDBaseT (RJ45) Inputs
- Supports 1080p to 330 feet
- Supports UHD resolutions
- Supported resolutions: 30 Hz 4:2:0, 1920x1200, 1080p 4:4:4 & 3D
- Controllable via the matrices front panel, RS232, WEB GUI and iOS/Android App
- Fast switching speed
- No latency
- Closed Caption (CC) Pass-through
- High bandwidth up to 10.2 Gbps
- Built-in HDCP 1.4 internal management
- Built-in EDID & DDC management
- Supports Lip-Sync pass-through
- Supports up to 48-bit Deep Color & x.v color
- Supports 7.1 Dolby Digital, True HD and DTS-HD audio
- Plug & play
HDTV Supplys implementation of the HDBaseT technology and this product adds virtually zero latency to the HDMI audio and video signal, less than 7 microseconds (0.000007 sec) over 330 feet of CAT6 cable. At 100 feet you are talking about 3 microseconds (0.000003 sec). This means for example, in a factory, church or auditorium, the speakers lips are always in synch with the video image on all the TVs and projectors 100's of feet away.
NOTE: Do not combine or use our 1080p based SDI, VGA or DVI Boards with our 4-Port HDMI Board & our HDBaseT Boards in the same matrix chassis. These Boards are designed to work only on based system delivering pure resolutions and cannot be combined with any analog or 1080p Board system. Always call us at 833-WOLFPACK (833-965-3722) and let us configure a system for you or point you to a preconfigured matrix.
HDTV Supply, Inc. is an HDBaseT.Org Approved Adopter of HDBaseT Products.
Why not buy this 4-Port HDbaseT Input Board today?
4-Port HDbaseT Input Board Specs:
- Input: 4 - HDMI 1.4 (Female HDMI); T.M.D.S. 2.9 V/3.3 V and 75 ohm
- Input signal: DVI-D full digital or HDMI
- Gain: 0 dB
- Bandwidth: 6.75 Gbps
- Resolution range: Up to 1920 x 1200 or 1080P at 60Hz
- 3D: Yes
- HDCP: 1.4 management
- Switching speed: 200ns (Max.)
- Max. time-delay: 5ns (plus or minus 1ns)
- Crosstalk: <-50 dB at 5MHz
- DVI/HDMI standards: DVI 1.1/HDMI 1.4 and supports EDID and DDC
Why not buy this 4-Port HDbaseT Input Board today?
Operation - For All Available Boards DIP Switcher
Operation - POC DIP Switch on the HDBaseT Board
Operation - Tips for the HDbaseT products POC Function Set Up Steps
Operation Tips for HDbaseT Products with POC - Set Up Steps
Specifications For All Modular Matrices Single Port Boards
Comparison Spreadsheet For All Modular Matrices Single Port Boards
Documents for the WolfPack 9x9, 18x18 & 36x36 Boards and Chassis
Why not buy this 4-Port HDbaseT Input Board today?
Control
When one is designing an HDMI Matrix Switch the most important initial specification is the number of inputs and Inputs you will need in your facility. The next, and often forgotten, is how the user wants to control those inputs and Inputs. HDTV Supply has your back when you're buying one of our WolfPack Family of Modular Matrix Switchers as we have dozens of way to control the inputs and Inputs and are shown at Controlling WolfPack Modular Matrix Systems, as well as below:- Remote Keypad for WolfPack Matrix Systems
- Free 15-Button Remote Control
- Free Windows PC Control Software
- Free iPad App (iOS)
- Free iPhone App (iOS)
- Free iPod App (iOS)
- Free Android Tablet App
- Free Android Phone App
- Free Samsung Galaxy Tablet App
- Free Samsung Galaxy Phone App
- Free Amazon Fire Tablet App
- Free Web GUI from any browser is standard
- Front panel push-buttons are standard
- Optional 7-inch Color Touch Screen for Setup & Control
- RS232 ports are standard on select models
- TCPIP ports are standard on select models
- Sports Bar DirecTV™ Control System (Call)
- Free One-Way Control4 Drivers
- Optional $99 2-Way Control4 Drivers
- Optional $99 URC Drivers
- Optional $99 Elan Drivers
- Optional $129 Crestron Modules
- Optional $99 RTI Drivers
- Optional Harmony Remote Control Codes
Why not buy this 4-Port HDbaseT Input Board today?
Control Drivers
- Control4 Drivers
- Elan Drivers
- RTI Drivers
- URC Drivers
- Crestron Modules
- We Need AMX Drivers
- We Need Extron Drivers
- We Need Savant Drivers
DirecTV Controller
Apps
This Board used with our modular HDMI matrix switchers can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.
For experienced AV hardware and software professionals who want to write their own drivers for 3rd party control systems from:
- AMX™
- Control4™
- Creston™
- RTI™
- DTVGameControl™
- Elan g!™
- Media Switcher™
- OnControls™
- Savant™
- SimpleControl™
- SwitchItUp™
- SAVI Control™
- URC Control™
...and we have created a simple and very easy to use RS232 script to write your own drivers.
EXAMPLE: If you want to switch input 8 to Input 1, 8, 16, the RS232 command would be x1&8&16. and notice the command has a period (.) at the end of the string. The matrix even replies "OK" when the right command is received and "Failed" when receiving a wrong command. Here is the RS232 User Manual if you want to write your own drivers.
How to use the info:
END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:
- Call us for a quote
- Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.
CAVEAT: We are not certified by any of the above 3rd party control systems companies nor have the necessary hardware to verify, troubleshoot and support the 3rd party writing of the code. We do warranty, though, that the RS232 script in the above RS232 Users Manual has and will work to control the matrix directly.
Also, CLICK HERE for our DirecTV™ & HDMI Matrix Control Software for Bars & Restaurants
Why not buy this 4-Port HDbaseT Input Board today?
A: We tested the 2048x1080@60Hz and 2560x1440@60hz and both resolution can be supported by the Boards.
Q: Do you have any tips in the unlikely event the unit fails?
A: Turn it OFF and then disconnect the matrix from the AC power and all cables. Pull out each board from the rear and push back in. Plug all cables back in and turn it on.
Q: What are the HDCP options?
A: You can choose either to open or close the HDCP on the Input Board. A receiver that cannot support HDCP can also display the sources with HDCP.
- Mix-n-Match combinations:
- Non-HDCP source to a HDCP compliant TV
- HDCP source to a non-HDCP compliant TV
Q: What is you test procedure?
A: Our testing procedure is:
- Assembling: Production line self-testing (Basic Functions)
- Initial Testing: Includes every Board, control software and front panel front buttons
- 24 Hours Aging: Gao Sheng Standard Aging Room
- Final testing: All Functions
- QC final Inspection: Sticker, serial number, etc
- Packing: Pack and ship
Why not buy this 4-Port HDbaseT Input Board today?
![2 Year WolfPack Warranty 2 Year WolfPack Warranty](https://lib.store.yahoo.net/lib/yhst-25967117716530/2year.jpg)
Slide-in Boards & HDBaseT Extenders: If a board or extender goes bad in the first 2-years & HDTV Supplys Tech Support team verifys the problem after a telephone call, HDTV Supply will send a new or like-new unit within the USA usually within 24-hours by USPS Air Priority at HDTV Supplys expense. We will ask for a credit Board for payment in case the bad Board is not sent back to us within 5-business days. You will need to provide us the tracking number as we will to you and you will need to pay for the Boards return. In order to get a warranty replacement for a defective Board HDTV Supplys Support Team will verify the product is eligible for a warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 3 or 5 Year warranty for this Board. Please call us for a quote.