1X4 HDMI Splitter with HDMI 1.4 Compliancy Features:
- One HDMI input signal split to four HDMI devices
- Supports Full 2D and 3D
- HDMI 1.4 compliant and all lower versions
- Optionally supports IR to control AV devices
- Built-in extender transmits video ~100 feet
- Small size fits almost anywhere
- HDCP 1.2 protocol compliant
- Bandwidth: 2.22 Gbps per channel, 6.65 Gbps total
- Supports Full HD1080p 24fps, 60Hz HDMI video
- Supports deep color 30 bit and 36 bit
- Supports resolution up to 1920 x 1200
- Supports standard 24 bit color (RGB/YPbPr) and xvYCC color space
- Supports DTS-HD, true-HD, LPCM7.1, AC3, DTS and DSD audio formats.
- Supports Blue-Ray 24/50/60fs/HD-DVD/xvYCC
- Supports signal retiming
- Supports input up to 15 metres 22AWG or AWG24 HDMI 1.3 or 1.4 standard cable lengths and outputs up to 25 metres with 22AWG or AWG24 cable length
- No loss of quality
- Installs in minutes
- Includes DC5V/4A power supply
When used with the OPTIONAL IR Extender Kit, equipment can be controlled without installing additional wires to control your source device from the viewing location. Each kit includes 1 target, 1 emitter and 1 HDMI adapter and you can optionally buy one.
Why not buy this 1X4 HDMI Splitter w/3D & IR Extender today?
- HDMI version: HDMI 1.4a with 3D
- HDCP version: HDCP1.3
- HDMI resolution: 1080P24fs/1080P/1080i/720P/576P/576i/480P/480i
- Full-HD chain: 1080p cascade above 4 layers
- Supported video color format: 24bit/deep color 36bit
- Supported audio format: DTS-HD/Dolby-true-HD/LPCM7.1/DSD
- Date transfer speed: 6.75Gbps
- Input Video signal: 5.0 Volts P-P
- Input cable distance: <15m HDMI AWG24
- Output cable distance: <=15m AWG24 HDMI1.3 standard cable
- Max working current: 1200mA
- Power adapter supply: DC:5V, 3A
- Power adapter format: Input: AC (50HZ.60HZ)100V-240V; Output: DC12V
- Operating Temperature range: (-15 to +55 Degree)
- Operating Humidity range: -5 to 90%RH (No Condensation)
- Dimension (L x W x H): 114.5X62.5X26 (mm)
- Weight: 219 g
This 1X4 HDMI Splitter w/3D works with the following devices:
- Any high definition Dish Network and DirecTV receiver with HDMI outputs
- High definition TiVo's with HDMI outputs
- Any high definition cable receiver with HDMI outputs
- Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
- Any "Over The Air" (OTA) high definition receiver with HDMI outputs
- Sony PS3, HD DVD and Blu-ray DVD players
- Any Xbox360 with HDMI outputs
- Any upconverting DVD player with HDMI outputs
- Any DVHS VCR with HDMI outputs
- Both APPLE-TV's with HDMI outputs
- A Boxee with HDMI ouputs
- A VuDu with HDMI outputs
- A Roku with HDMI outputs
- Many PC video cards with HDMI outputs
- Any high definition camcorder with an optional type C to standard HDMI cable
- Many A/V surround sound receivers with HDMI switching that include the proper chip set and output amp. Call your AV receiver supplier to discuss your application or us.
- Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
- and other similar devices.
A: Yes, the four outputs are independent and the 1X4 HDMI Splitter works even when only one display is turned ON. Many HDMI splitters have synchronized outputs which require all displays to be turned ON at the same time for those splitters to work.
Q: Is it possible to run both a 1080 and 720 TV from a splitter like this 1X4 HDMI Splitter w/3D?
A: The 1X4 HDMI Splitter w/3D will carry a signal up to 1080p resolution, and the panels will only display what they're capable of displaying. The splitter will not change the resolution of anything along the line, it simply redistributes whatever is fed into it.
Per HDMI protocol the unit with the lower video and audio formats connected to the single HDMI video source will be supported. This is determined by HDMI video source unit, not determined by HDMI Splitter.
For example: The HDMI video source will send 720P video out if two display units connected to the splitter outputs are 1080P and 720P and the audio format will be stereo if the TV connected to the splitter output can only do stereo (most TVs can only deliver stereo sound