By having 1-port slide in cards the matrix is very reliable as in the unlikely even there is a loss of signal you just replace the card with a spare you have purchased or order another from us. The complete matrix doesn't have to be sent to us for a repair.
This 1080p HDMI Output Card is used in our HDTV Supply line of 9x9, 18x18 and 36x36 modular matrix switchers that feature one-slot card cages using 9, 18 or 36 of these one-port HDMI Output cards depending upon your system needs.
1080p HDMI Output Card Features:
- Supports one (1) HDMI Output, version HDMI 1.4 and all past versions
- Seamless Switching at 100ms (.1) second
- Supports 1080p 4:4:4 HDR resolutions
- Also, supported resolutions: 1080p@30 Hz 4:2:0, 1920x1200, 1080p 4:4:4 & 3D
- Supports a TV Video Wall Function
- Supports 3.5mm de-embedded stereo audio
- No latency
- Controllable via the matrices front panel buttons, RS232, WEB GUI and iOS/Android App
- Closed Caption (CC) Pass-through
- High bandwidth up to 10.2 Gbps
- Built-in HDCP 1.4 internal management
- Built-in EDID & DDC management
- Supports Lip-Sync pass-through
- Supports up to 48-bit Deep Color & x.v color
- Supports 7.1 Dolby Digital, True HD and DTS-HD audio
- Plug & play
100ms Seamless HDMI Switching: This WolfPack™ 1080p HDMI Output Card delivers 100ms instantaneous video switching with full 1080p/60 video at each port. This high-performance engine processes HDMI signals by executing EDID hops and HDCP handshakes simultaneously at both the source input, the display outputs and scales the inputs for the best output resolution. It sets the output clock timing and uses a frame buffer to retain the input signal information for the fastest output.
Separate Embedded Audio In and De-embedded Audio Out: The 1080p HDMI Output Card allows you to display video with separate audio coming from another audio source as it supports embedding the audio on the HDMI input cards 3.5mm audio connector and then de-embedding the audio on the HDMI output cards 3.5mm audio.
Hardware Scaling via DIP Switches on both in and out cards: The 8-pin DIP switch on the cards are for the manual scaling up/down. Each HDMI card has a 8-pin DIP switch to select multiple resolution settings to conform to your HDMI source devices and the HDMI destination devices.
NOTE: Do not combine or use our 1080p based SDI, VGA or DVI cards with this 1080p HDMI card & our 1080p HDBaseT cards in the same matrix chassis. These 1080p cards are designed to work only on 1080p based system delivering pure 1080p resolutions and cannot be combined with any analog card system.
Why not buy this 1080p HDMI Output Card today?
1080p HDMI Output Card Specs:
- Output: 1 - HDMI 1.4 (Female HDMI); T.M.D.S. 2.9 V/3.3 V and 75 ohm
- Output signal: DVI-D full digital or HDMI
- Gain: 0 dB
- Bandwidth: 10.2 GBPS
- Resolution range: Up to 1080p, 1920 x 1200 or 1080p at 60Hz
- 3D: Yes
- HDCP: 1.4 management
- Switching speed: 200ns (Max.)
- Max. time-delay: 5ns (plus or minus 1ns)
- Crosstalk: <-50 dB at 5MHz
- DVI/HDMI standards: DVI 1.1/HDMI 1.4 and supports EDID and DDC
Why not buy this 1080p HDMI Output Card today?
Operation - EDID Setup for the 4K30 (HDMI & HDBaseT) Input Card
Operation - For All Available Cards DIP Switcher
Operation - POC DIP Switch on the HDBaseT Card
Operation - Tips for the HDbaseT products POC Function Set Up Steps
Specifications For All Modular Matrices Single Port Cards
Comparison Spreadsheet For All Modular Matrices Single Port Cards
Documents for the WolfPack 9x9, 18x18 & 36x36
EDID Learning Instruction for the Cards
Why not buy this 1080p HDMI Output Card today?
DirecTV Controller
This card used in our modular HDMI matrix switchers can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.
For experienced AV hardware and software professionals who want to write their own drivers for 3rd party control systems from:
- AMX™
- Control4™
- Creston™
- RTI™
- DTVGameControl™
- Elan g!™
- Media Switcher™
- OnControls™
- Savant™
- SimpleControl™
- SwitchItUp™
- SAVI Control™
- URC Control™
...and we have created a simple and very easy to use RS232 script to write your own drivers.
EXAMPLE: If you want to switch input 8 to output 1, 8, 16, the RS232 command would be x1&8&16. and notice the command has a period (.) at the end of the string. The matrix even replies "OK" when the right command is received and shows an "ERR" when receiving a wrong command. Here is the RS232 User Manual if you want to write your own drivers.
How to use the info:
END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:
- Call us for a quote
- Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.
CAVEAT: We are not certified by any of the above 3rd party control systems companies nor have the necessary hardware to verify, troubleshoot and support the 3rd party writing of the code. We do warranty, though, that the RS232 script in the above RS232 Users Manual has and will work to control the matrix directly.
Also, CLICK HERE for our DirecTV™ & HDMI Matrix Control Software for Bars & Restaurants
Why not buy this 1080p HDMI Output Card today?
A: See the DIP switch settings here for the 1080p HDMI output cards.
Q: How many Preset scenes can I Save and Recall?
A: 40.
Q: What are the HDCP options?
A: You can choose either to open or close the HDCP on the output card. A receiver that cannot support HDCP can also display the sources with HDCP.
Mix-n-Match combinations:
Non-HDCP source to a HDCP compliant TV
HDCP source to a non-HDCP compliant TV
Q: Do you have any tips in the unlikely event the card fails?
A: Turn it OFF & then disconnect the matrix from the AC power & all cables. Pull out each board from the rear & push back in. Plug all cables back in & turn it on.
Q: What is you test procedure?
A: Our testing procedure is:
- Assembling: Production line self-testing (Basic Functions)
- Initial Testing: Includes every card, control software and front panel front buttons
- 24 Hours Aging: Gao Sheng Standard Aging Room
- Final testing: All Functions
- QC final Inspection: Sticker, serial number, etc
- Packing: Pack and ship
HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.
If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com
Slide-in Boards & HDBaseT Extenders: If a board or extender goes bad in the first 2-years & HDTV Supplys Tech Support team verifys the problem after a telephone call, HDTV Supply will send a new or like-new unit within the USA usually within 24-hours by USPS Air Priority at HDTV Supplys expense. We will ask for a credit card for payment in case the bad card is not sent back to us within 5-business days. You will need to provide us the tracking number as we will to you and you will need to pay for the cards return. In order to get a warranty replacement for a defective card HDTV Supplys Support Team will verify the product is eligible for a warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 3 or 5 Year warranty for this card. Please call us for a quote.